Controls And Connectors - RME Audio ADI-2 FS User Manual

12. Controls and Connectors

Front
The front of the ADI-2 FS has 5 buttons, a volume potentiometer, a headphone output via ste-
reo TRS jack and 31 LEDs.
Rear
The rear panel of the ADI-2 FS features 2 servo-balanced analog inputs via XLR/jack combo
jacks, 2 TS jacks as unbalanced outputs, 2 XLR jacks as balanced outputs, SPDIF I/O via
TOSLINK optical and RCA coaxial, and a lockable power supply jack.
Optical I/O (TOSLINK): The device automatically detects whether a signal is present in SPDIF
or ADAT format. The optical output can operate in SPDIF or ADAT mode after switching via DIG
OUT. Please note that in ADAT format only channels 1/2 are accessible. However, SMUX and
SMUX4 (up to 192 kHz) are supported.
Socket for power supply. This jack supports lockable plugs, such as those of the supplied
RME power supply. After inserting the plug, carefully rotate it 90° for locking.
User's Guide ADI-2 FS © RME
15