Warnings - Graco 24L096 Instructions Manual

Display display control control module and advancedadvanced advanced display display control control module
Hide thumbs Also See for 24L096:
Table of Contents

Advertisement

Warnings

Warnings
Warnings
Warnings
The following warnings are for the setup, use, grounding, maintenance and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
FIRE AND
FIRE
FIRE
AND EXPLOSION
AND
Flammable fumes, such as solvent and paint fumes, in work
prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Ground all equipment in the work area. See Grounding
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless
they are antistatic or conductive.
Stop operation
operation immediately
• Stop
Stop
operation
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
SPECIAL CONDITIONS
SPECIAL
SPECIAL
The DCM and ADCM do not provide 500 VAC isolation through the coupling nuts on the
enclosure. The associated apparatus and the field apparatus cable shields must not be
connected to the DCM or ADCM coupling nuts. To help prevent fire, explosion, or electric
shock, equipment must comply with the following conditions.
• Follow all isolation and grounding instructions. See
Static charge may build up on plastic parts during cleaning and could discharge and ignite
flammable vapors. To help prevent fire and explosion:
• Clean plastic parts only in a well ventilated area.
• Do not clean with a dry cloth.
4
WARNING
EXPLOSION HAZARD
EXPLOSION
HAZARD
HAZARD
immediately if static sparking occurs or you feel a shock. Do not use
immediately
CONDITIONS FOR
FOR SAFE
SAFE USE
CONDITIONS
FOR
SAFE
work area
work
Grounding instructions.
Grounding
USE
USE
Grounding, page 8
area can ignite or explode. To help
area
.
332013E

Advertisement

Table of Contents
loading

This manual is also suitable for:

24l09724n67124n672

Table of Contents