Appendix A - Control Drawing 16M169 - Graco 24L096 Instructions Manual

Appendix A A A - - - Control Control Drawing
Appendix Appendix Control
9902471 9902471 9902471
Class Class Class I, , , Div.
Group Group D D D T3 Group
Ex ia ia ia [ia]
Ex Ex
Ta=0°C to to to 50°C
Ta=0°C Ta=0°C
Ex ia ia ia [ia] [ia] op op is is is IIA A A T3
Ex Ex [ia] op
IECEx IECEx IECEx ITS ITS 18.0023X ITS
Ta=0°C Ta=0°C to to to 50°C Ta=0°C
GRACO INC
GRACO GRACO
P.O. Box Box 1441
P.O. P.O. Box
Minneapolis, MN
Minneapolis, Minneapolis,
U.S.A.
U.S.A. U.S.A.
332013E
Drawing 16M169
Drawing
Div. Div. 1, 1, 1,
T3 T3
[ia]
[ia]
50°C
50°C
T3 Ga Ga
T3 Ga
18.0023X 18.0023X
50°C 50°C
2575
2575 2575
INC
INC
1441
1441
MN 55440 55440
MN 55440

Appendix A - Control Drawing 16M169

16M169
16M169
NOTES:
1. The non-intrinsically safe terminals (power rail)
must not be connected to any device which uses or
generates more than Um=250 Vrms or DC unless
it has been determined that the voltage has been
adequately isolated.
2. Installation should be in accordance with ANSI/ISA
RP12.06.01 "Installation of Intrinsically Safe Systems
for Hazardous (Classified) Locations" and the National
Electrical Code® (ANSI/NFPA 70).
3. Installation in Canada should be in accordance with
the Canadian Electrical Code, CSA C22.1, Part 1,
Appendix F.
4. For ATEX, install per EN 60079–14 and applicable
local and national codes.
5. Multiple earthing of components is allowed only if a
high integrity equipotential system is realized between
the points of bonding.
6. Do not remove any cover until power has been
removed.
7. Lithium clock cell: Manufacturer: Panasonic; Part
Number: CR2032; No orientation restrictions.
8. For installation, maintenance or operation instructions,
see instruction manual.
Warning: Substitution of components may impair intrinsic
safety.
Avertissement: La substitution de composants peut
compromettre la securite intrinseque.
13