Pnp/Pci Configurations - MSI MS-7072 Manual

Setting BIOS Function

2.8 PnP/PCI Configurations

This section describes configuring the PCI bus system and PnP
(Plug & Play) feature. PCI, or Peripheral Component Interconnect, is a
system which allows I/O devices to operate at speeds nearing the speed
the CPU itself uses when communicating with its special components.
This section covers some very technical items and it is strongly recom-
mended that only experienced users should make any changes to the
default settings.
Clear ESCD
Normally, you leave this field [Disabled]. Select [Enabled] to reset Ex-
tended System Configuration Data (ESCD) when you exit Setup if you
have installed a new add-on and the system reconfiguration has caused
such a serious conflict that the operating system cannot boot.
Primary Graphic Adaptor
This setting specifies which VGA card is your primary graphics adapter.
Setting options are:
2-21