MSI MS-7072 Manual page 35

Chapter 2
Onboard Chip SATA
This setting is used to specify the S-ATA IDE interface. The settings are:
[Disabled]
[Enalbed]
SATA ROM Control
This setting is used to specify the S-ATA HDD function. The settings
are:
[Disabled]
[Enalbed]
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1/2
These items specify the base I/O port address and IRQ for the onboard
Serial Port 1/2. Selecting [Auto] allows BIOS to automatically deter-
mine the correct base I/O port address. Settings: [Disabled], [3F8/IRQ4],
[2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3], [Auto].
2-18
Disable the S-ATA controller.
Enable the S-ATA controller.
Disable the SATA HDD function.
Enable the S-ATA HDD function.