Pioneer MVH-350BT Service Manual page 21

5
-
Disassembling the Panel Part (Fig.4, 5)
1. Remove the arm while bending the rib of the panel upward.
2. Press the upside hook and the bottom side hook of the
button at the same time, and pull out the button.
-
Assembling the Panel Part (Fig.6, 7, 8)
1. Attach the button from the front side of the panel.
2. Attach the spring to the arm as shown in the figure.
5
6
Hitch the spring to the groove.
MVH-350BT/XMEW5
6
7
The bended tip of the
spring is set to this side.
7
8
A
Fig.4
B
C
Fig.5
D
Fig.6
E
F
Fig.7
21
8