Pioneer MVH-S510BT Operation Manual

Pioneer MVH-S510BT Operation Manual

Digital media receiver
Table of Contents
  • Français

    • Mise en Route
    • Radio
    • Usb/Iphone®/Aux
    • Bluetooth
    • Spotify
    • Utiliser Pioneer Smart Sync/App
    • Utilisation de la Fonction Karaoké
    • Paramètres Audio
    • Réglages
    • Réglages FUNCTION
    • Réglages AUDIO
    • Réglages SYSTEM
    • Réglages ILLUMINATION
    • Réglages MIXTRAX
    • Réglages MICROPHONE
    • Informations Complémentaires
  • Italiano

    • Operazioni Preliminari
    • Radio
    • Usb/Iphone®/Aux
    • Bluetooth
    • Spotify
    • Utilizzare Pioneer Smart Sync/App
    • Uso Della Funzione Karaoke
    • Regolazioni Audio
    • Impostazioni
    • Impostazioni FUNCTION
    • Impostazioni AUDIO
    • Impostazioni SYSTEM
    • Impostazioni ILLUMINATION
    • Impostazioni MIXTRAX
    • Impostazioni MICROPHONE
    • Informazioni Aggiuntive
  • Español

    • Procedimientos Iniciales
    • Radio
    • Usb/Iphone®/Aux
    • Bluetooth
    • Spotify
    • Uso de Pioneer Smart Sync/App
    • Uso de la Función Karaoke
    • Ajustes de Audio
    • Ajustes
    • Ajustes de FUNCTION
    • Ajustes de AUDIO
    • Ajustes de SYSTEM
    • Ajustes de ILLUMINATION
    • Ajustes de MIXTRAX
    • Ajustes de MICROPHONE
    • Información Complementaria
  • Deutsch

    • Erste Schritte
    • Radio
    • Usb/Iphone®/Aux
    • Bluetooth
    • Spotify
    • Verwenden von Pioneer Smart Sync/App
    • Verwenden der Karaoke-Funktion
    • Audioanpassungen
    • Einstellungen
    • FUNCTION-Einstellungen
    • AUDIO-Einstellungen
    • SYSTEM-Einstellungen
    • ILLUMINATION-Einstellungen
    • MIXTRAX-Einstellungen
    • MICROPHONE-Einstellungen
    • Zusätzliche Informationen
  • Dutch

    • Aan de Slag
    • Radio
    • Usb/Iphone®/Aux
    • Bluetooth
    • Spotify
    • Pioneer Smart Sync/App Gebruiken
    • De Karaokefunctie Gebruiken
    • Audio Aanpassen
    • Instellingen
    • FUNCTION-Instellingen
    • AUDIO-Instellingen
    • SYSTEM-Instellingen
    • ILLUMINATION-Instellingen
    • MIXTRAX-Instellingen
    • MICROPHONE-Instellingen
    • Aanvullende Informatie

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

DIGITAL MEDIA RECEIVER
RECEPTEUR NUMERIQUE MULTIMEDIA
RICEVITORE MULTIMEDIALE DIGITALE
RECEPTOR DIGITAL DE MEDIOS
DIGITALER MEDIA RECEIVER
DIGITALE MEDIA-RECEIVER
Operation Manual
MVH-S510BT
Mode d'emploi
Manuale d'istruzioni
Manual de instrucciones
Bedienungsanleitung
Bedieningshandleiding

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer MVH-S510BT

  • Page 1 DIGITAL MEDIA RECEIVER RECEPTEUR NUMERIQUE MULTIMEDIA RICEVITORE MULTIMEDIALE DIGITALE RECEPTOR DIGITAL DE MEDIOS DIGITALER MEDIA RECEIVER DIGITALE MEDIA-RECEIVER Operation Manual MVH-S510BT Mode d’emploi Manuale d’istruzioni Manual de instrucciones Bedienungsanleitung Bedieningshandleiding...
  • Page 2: Table Of Contents

    Getting Started ..................3 Radio ......................7 USB/iPhone®/AUX..................9 Bluetooth ....................11 Spotify® ....................15 Using Pioneer Smart Sync/APP............17 Using the Karaoke Function ............... 20 Audio Adjustments ................21 Settings ....................22 FUNCTION settings ................23 AUDIO settings ..................24 SYSTEM settings ..................
  • Page 3: Getting Started

    Getting Started Basic operation MVH-S510BT M.C. (multi-control) dial USB port SRC (source)/OFF DISP (display) BAND/ Display window (navigation)/LIST Detach button AUX input jack (3.5 mm stereo jack) Frequently used operations Purpose Operation Turn on the power* Press SRC/OFF to turn on the power.
  • Page 4 Appears when a Bluetooth connection is made (page 11). Appears when a Pioneer Smart Sync connection is made (page 17). Detaching the front panel Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.
  • Page 5 RESET button Setup menu When you turn the ignition switch to ON after installation, the setup menu appears in the display. WARNING Do not use the unit in standard mode when a speaker system for network mode is connected to the unit.
  • Page 6 [USB CONN. SET] appears when all the settings have been made. Press the M.C. dial to clear the message. • A message that prompts you to install the Pioneer Smart Sync application will appear on your iPhone/Android device by connecting your device to the unit via USB.
  • Page 7: Radio

    Press and hold SRC/OFF to display the main menu. Turn the M.C. dial to select [INITIAL], then press to confirm. Turn the M.C. dial to select an option, then press to confirm. Menu Item Description FM STEP Select the FM tuning step from 100 kHz or 50 kHz. [100], [50] REAR-SP Select when there is a full-range speaker connected to the rear...
  • Page 8 Best stations memory (BSM) The six strongest stations are stored on the number buttons (1/ to 6/ After selecting the band, press the M.C. dial to display the main menu. Turn the M.C. dial to select [FUNCTION], then press to confirm. Turn the M.C.
  • Page 9: Usb/Iphone®/Aux

    USB/iPhone®/AUX (iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM settings (page 28).) Playing back Disconnect headphones from the device before connecting it to the unit. USB devices (including Android™)/iPhone Open the USB port cover. Plug in the USB device/iPhone using an appropriate cable.
  • Page 10 The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 30. NOTES • iPhone needs to be connected with Pioneer Smart Sync via USB for using this function (page 17). - 10 -...
  • Page 11: Bluetooth

    • Depending on the file/song, sound effects may not be available. • Turn the MIXTRAX function off if the illumination effects it produces interfere with driving. Press 3/MIX to turn MIXTRAX on/off. Bluetooth Bluetooth connection Important If ten or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly.
  • Page 12 Important • Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the vehicle’s battery. • Be sure to park your vehicle in a safe place and apply the parking brake before operation. To make a phone call Press to display the phone menu.
  • Page 13 For details on the voice recognition features, refer to the manual supplied with your device. When a Pioneer Smart Sync connection is made (page 17), you can also use the voice recognition function from Pioneer Smart Sync installed on your iPhone/Android device by pressing and holding .
  • Page 14 Menu Item Description DEL DEVICE Delete the device information. [DELETE YES], [DELETE NO] ADD DEVICE Register a new device. DEV. INFO Switch the device information on the display between the device name and Bluetooth device address. * If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call.
  • Page 15: Spotify

    Spotify® (Not available when [USB MTP] is set to [ON] in the SYSTEM settings (page 28).) Spotify is a music streaming distribution service not affiliated with Pioneer. More information is available at http://www.spotify.com. The Spotify application is available for compatible smartphones, please visit https:// support.spotify.com/ for the latest compatibility information.
  • Page 16 Turn the M.C. dial to select one of the below. • Select [WIRED] for the USB connection. • Select [BLUETOOTH] for the Bluetooth connection. Press SRC/OFF to select [SPOTIFY]. Launch the Spotify application on the mobile device and start playback. NOTE When you connect a mobile device other than an iPhone/Android device, it may not operate correctly depending on your mobile device.
  • Page 17: Using Pioneer Smart Sync/App

    For details on what operations are available on the application, see the application’s help section. NOTE The APP source is not available when a Pioneer Smart Sync connection is not made or [USB MTP] is set to [ON] in the SYSTEM settings (page 28). WARNING Do not attempt to operate the application while driving.
  • Page 18 – Controlling your connected Bluetooth device Extending the functions of the unit by using the application The following functions, which are unavailable on the unit alone, are available by making a Pioneer Smart Sync connection. Menu Item (example) Description Using a navigation application You can specify and start the navigation application installed on your device.
  • Page 19 • The 31 Band EQ setting is converted into 13 bands when a music source from this product is engaged. It is recommended to enter the search term "Pioneer Smart Sync" in the search field to search for the application.
  • Page 20: Using The Karaoke Function

    • If Pioneer Smart Sync has not been installed on your iPhone/Android device yet, a message that prompts you to install the application will appear on your iPhone/Android device (except for the Android device connected via Bluetooth). Select [OFF] in [AUTO APP CONN] to clear the message (page 28).
  • Page 21: Audio Adjustments

    NOTE If howling occurs when using the microphone, keep the microphone away from the speaker or lower the microphone volume. To reduce the level of the vocals in a song Press the M.C. dial to display the main menu. Turn the M.C. dial to select [MICROPHONE] then press to confirm. Turn the M.C.
  • Page 22: Settings

    Standard mode: [FRONT], [REAR], [SUBWOOFER] NOTE [SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 25). Press the M.C. dial to display the main menu. Turn the M.C. dial to select [AUDIO], then press to confirm. Turn the M.C. dial to select [CROSSOVER], then press to confirm. Turn the M.C.
  • Page 23: Function Settings

    • SYSTEM settings (page 26) • ILLUMINATION settings (page 29) • MIXTRAX settings (page 30) • MICROPHONE settings (page 31) Turn the M.C. dial to select the options, then press to confirm. FUNCTION settings The menu items vary according to the source. Menu Item Description FM SETTING...
  • Page 24: Audio Settings

    PLAY Start playback. STOP Stop playback. AUDIO settings NOTE [CHK APP SETTG.] may be displayed when the setting is performed from Pioneer Smart Sync. Menu Item Description EQ SETTING [SUPER BASS], [POWERFUL], Select or customise the equalizer curve. [DYNAMIC], [NATURAL], [VOCAL], •...
  • Page 25 Menu Item Description FADER*1 (Only for standard mode) Adjust the front and rear speaker balance. BALANCE Adjust the left and right speaker balance. SUBWOOFER [ON], [OFF] Set to [ON] when using a subwoofer speaker. SUBWOOFER*2 [NOR], [REV] Select the subwoofer phase. SPEAKER LEVEL Network mode: [HIGH L], [HIGH Select a speaker unit (filter) and adjust the...
  • Page 26: System Settings

    [CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. • The settings that can be saved differ when a Pioneer Smart Sync connection is made. LOAD SETTINGS Load the sound settings, when you have already performed [SAVE SETTINGS].
  • Page 27 [DEU](German) CLOCK SET [12H], [24H] Set the clock (page 5). • This setting is not available when a Pioneer Smart Sync connection is made. BEEP TONE (Only for standard mode) [ON], [OFF] A beep can be heard when any button is pushed.
  • Page 28 Information on the connections for each device The available sources differ depending on the setting value. Please set [APP CONTROL] according to the table for the source you want to use. For details on Pioneer Smart Sync connection, see page 17. - 28 -...
  • Page 29: Illumination Settings

    When Pioneer Smart Sync connection is NOT performed Setting Value Device Available source(s) [WIRED] iPhone iPhone, SPOTIFY Android USB (AOA) [BLUETOOTH] iPhone iPhone, SPOTIFY Android SPOTIFY When Pioneer Smart Sync connection is performed Setting Value Device Available source(s) [WIRED] iPhone...
  • Page 30: Mixtrax Settings

    [PHONE COLOUR] – you are on a phone call – the message received on the device is being read when a Pioneer Smart Sync connection is made – the front panel is attached. The illumination effect will activate when the ACC power is turned on/off regardless of this setting.
  • Page 31: Microphone Settings

    Menu Item Description FLASH PATTERN [SOUND LEVEL 1] to [SOUND LEVEL Change the illumination effect according to the sound and bass level. The flash pattern changes according to the sound level. [LOW PASS 1] to [LOW PASS 6] The flash pattern changes according to the bass level.
  • Page 32: Additional Information

    ON again. If the message remains, – Select the repeat play range again. contact your dealer or an authorized Pioneer Service Station for assistance. A subfolder is not played back. → Subfolders cannot be played when NO XXXX (NO TITLE, for example) [FLD] (folder repeat) is selected.
  • Page 33 SKIPPED ERROR-23 → The connected USB device contains → USB device was not formatted properly. DRM protected files. – Format the USB device with FAT12, – The protected files are skipped. FAT16 or FAT32. PROTECT ERROR-16 → All the files on the connected USB →...
  • Page 34 Handling guidelines CONNECT APP → Pioneer Smart Sync connection is not USB storage device made. • Connections via USB hubs are not – Make a connection with Pioneer Smart supported. Sync (page 17). • Firmly secure the USB storage device before driving.
  • Page 35 8 and 16 (LPCM) setting Sampling frequency 16 kHz to 48 kHz (LPCM) CAUTION • Pioneer cannot guarantee compatibility AAC files with all USB mass storage devices, and assumes no responsibility for any loss of Compatible format AAC encoded by...
  • Page 36 • Audiobook, Podcast: Compatible CAUTION Pioneer accepts no responsibility for data lost on the iPhone, even if that data is lost while this unit is used. Sequence of audio files The user cannot assign folder numbers and D: Display C: Character specify playback sequences with this unit.
  • Page 37 CONTRIBUTORS “AS IS” AND ANY EXPRESS registered trademarks owned by Bluetooth SIG, OR IMPLIED WARRANTIES, INCLUDING, BUT Inc. and any use of such marks by PIONEER NOT LIMITED TO, THE IMPLIED CORPORATION is under license. Other WARRANTIES OF MERCHANTABILITY AND...
  • Page 38 Google LLC. Chassis: 178 mm × 50 mm × 97 mm MIXTRAX Nose: 188 mm × 58 mm × 16 mm MIXTRAX is a trademark of the PIONEER CORPORATION. Chassis: 178 mm × 50 mm × 97 mm Spotify®...
  • Page 39 Frequency: 1.25 kHz/1.6 kHz/2 kHz/ WAV signal format: Linear PCM (Non- 2.5 kHz/3.15 kHz/4 kHz/5 kHz/6.3 kHz/ compressed) 8 kHz/10 kHz/12.5 kHz FM tuner Slope: –6 dB/oct, –12 dB/oct, –18 dB/ oct, –24 dB/oct Frequency range: 87.5 MHz to 108.0 MHz High pass filter (MID) (Network mode): Usable sensitivity: 11 dBf (1.0 μV/75 Ω, Frequency: 25 Hz/31.5 Hz/40 Hz/50...
  • Page 40 Mise en route.................... 3 Radio ......................7 USB/iPhone®/AUX..................9 Bluetooth ....................12 Spotify® ....................16 Utiliser Pioneer Smart Sync/APP ............18 Utilisation de la fonction karaoké ............. 22 Paramètres audio ................. 23 Réglages....................25 Réglages FUNCTION ................25 Réglages AUDIO ..................27 Réglages SYSTEM ..................
  • Page 41: Mise En Route

    Mise en route Fonctionnement de base MVH-S510BT Molette M.C. (multi-contrôle) Port USB SRC (source)/OFF DISP (affichage) BAND/ Fenêtre d’affichage (navigation)/LIST Touche de retrait Prise d’entrée AUX (prise stéréo 3,5 mm) Opérations fréquemment utilisées Objectif Opération Mettre l’appareil sous tension* Appuyez sur SRC/OFF pour mettre l’appareil sous tension.
  • Page 42 Apparaît lorsqu’une connexion Bluetooth est établie (page 12). Apparaît lorsqu’une connexion Pioneer Smart Sync est établie (page 18). Retrait de la face avant Retirez la face avant pour empêcher tout vol. Débranchez tous les câbles et les périphériques branchés à...
  • Page 43 – Si l’appareil ne fonctionne pas correctement – Lorsque des messages inhabituels ou d’erreur s’affichent Retrait de la face avant (page 4). Appuyez sur le bouton RESET à l’aide d’un instrument pointu qui mesure plus de 8 mm. RESET le bouton Menu de configuration Lorsque vous mettez le contact sur ON après avoir installé...
  • Page 44 [USB CONN. SET] apparaît lorsque tous les réglages sont terminés. Appuyez sur la molette M.C. pour effacer le message. • Un message vous invitant à installer l’application Pioneer Smart Sync apparaîtra sur votre périphérique iPhone/Android en connectant ce dernier à l’appareil via USB.
  • Page 45: Radio

    Tournez la molette M.C. pour sélectionner [YES], puis appuyez pour valider. Réglages INITIAL Appuyez longuement sur SRC/OFF jusqu’à ce que l’appareil se mette hors tension. Appuyez longuement sur SRC/OFF pour afficher le menu principal. Tournez la molette M.C. pour sélectionner [INITIAL], puis appuyez pour valider. Tournez la molette M.C.
  • Page 46 Réception des stations présélectionnées Appuyez sur SRC/OFF pour sélectionner [RADIO]. Appuyez sur BAND/ pour sélectionner la bande [FM1], [FM2], [FM3], [MW] ou [LW]. Appuyez sur l’une des touches numériques (1/ à 6/ CONSEIL Les touches peuvent également servir à sélectionner une station préréglée lorsque [SEEK] est réglé...
  • Page 47: Usb/Iphone®/Aux

    Utilisation des fonctions PTY L’appareil recherche une station diffusant des informations PTY (type de programme). Appuyez longuement sur pendant la réception FM. Tournez la molette M.C. pour sélectionner le type de programme [NEWS/INFO], [POPULAR], [CLASSICS] ou [OTHERS]. Appuyez sur la molette M.C.. L’appareil continue à...
  • Page 48 Connexions AOA Il est possible de connecter à l’appareil un périphérique utilisant le système d’exploitation Android 4.1 Android et prenant également en charge le système d’exploitation 2.0 AOA (Android Open Accessory) via une connexion AOA à l’aide du câble fourni avec le périphérique. REMARQUE Si vous utilisez une connexion AOA, [APP CONTROL] doit être réglé...
  • Page 49 MIXTRAX, voir page 34. REMARQUES • Pour utiliser cette fonction, l’iPhone doit être connecté à Pioneer Smart Sync via USB (page 18). • Selon le fichier/morceau, il se peut que les effets sonores soient indisponibles. • Désactivez la fonction MIXTRAX si les effets d’éclairage qu’elle produit vous gênent dans votre conduite.
  • Page 50: Bluetooth

    Bluetooth Connexion Bluetooth Important Si au moins dix périphériques Bluetooth (ex. : un téléphone et un lecteur audio séparé) sont connectés, il se peut qu’ils ne fonctionnent pas correctement. CONSEIL L’appareil se connectera ensuite automatiquement si le périphérique Bluetooth a été connecté précédemment aux étapes suivantes.
  • Page 51 Important • Si vous laissez l’appareil en veille pour vous connecter à votre téléphone via Bluetooth lorsque le moteur ne tourne pas, vous risquez d’épuiser la batterie du véhicule. • Assurez-vous de garer votre véhicule en lieu sûr et de serrer le frein à main avant utilisation. Pour passer un appel téléphonique Appuyez sur pour afficher le menu de téléphone.
  • Page 52 Pour plus de détails sur les fonctions de reconnaissance vocale, consultez le mode d’emploi de votre périphérique. CONSEIL Lorsqu’une connexion Pioneer Smart Sync est établie (page 18), vous pouvez également utiliser la fonction de reconnaissance vocale depuis Pioneer Smart Sync installé sur votre périphérique iPhone/ Android en appuyant longuement sur .
  • Page 53 Élément de menu Description PHONE BOOK Afficher les contacts sur votre téléphone. PRESET 1-6 Rappelez les numéros de téléphone présélectionnés. Vous pouvez également rappeler un numéro de téléphone présélectionné en appuyant sur l’une des touches de présélection (1/ à 6/ A.ANSR* Sélectionnez [ON] pour répondre automatiquement à...
  • Page 54: Spotify

    * Selon le périphérique connecté, il se peut que ces opérations soient indisponibles. Spotify® (Indisponible lorsque [USB MTP] est réglé sur [ON] dans les SYSTEM réglages (page 32).) Spotify est un service de diffusion de musique en continu non affilié à Pioneer. Des informations complémentaires sont disponibles sur http://www.spotify.com. - 16 -...
  • Page 55 L’application Spotify est disponible pour les smartphones compatibles ; veuillez consulter https://support.spotify.com/ afin d’obtenir les dernières informations sur la compatibilité. Pour profiter de Spotify pendant que vous conduisez, téléchargez d’abord l’application Spotify sur votre iPhone ou votre périphérique Android. Vous pouvez la télécharger sur le iTunes®...
  • Page 56: Utiliser Pioneer Smart Sync/App

    Pour plus de détails sur les opérations disponibles sur l’application, consultez la section d’aide de l’application. REMARQUE La source APP est indisponible lorsqu’une connexion Pioneer Smart Sync n’est pas établie ou que [USB MTP] est réglé sur [ON] dans les SYSTEM réglages (page 32). - 18 -...
  • Page 57 Pour les utilisateurs d’iPhone Cette fonction est compatible avec la version iOS 10.3 ou une version ultérieure. Vous pouvez télécharger Pioneer Smart Sync sur iTunes App Store. Pour les utilisateurs de périphérique Android Cette fonction est compatible avec les périphériques sur lesquels est installée la version OS 5.0 Android ou une version ultérieure.
  • Page 58 – Contrôler votre dispositif Bluetooth connecté Optimiser les fonctions de l’appareil par le biais de l’application Les fonctions suivantes, qui sont uniquement indisponibles sur l’appareil, sont disponibles si vous établissez une Pioneer Smart Sync connexion. Options du menu (exemple) Description Utiliser une application de navigation Vous pouvez spécifier et lancer l’application...
  • Page 59 • Le réglage sur 31 bandes EQ devient 13 bandes lorsqu’une source musicale de ce produit est activée. CONSEIL Il vous est recommandé d’entrer le terme recherché « Pioneer Smart Sync » dans le champ de recherche pour trouver l’application.
  • Page 60: Utilisation De La Fonction Karaoké

    • Lorsque vous connectez un périphérique portable autre qu’un périphérique iPhone/Android, il peut ne pas fonctionner correctement selon son modèle. • Si Pioneer Smart Sync n’a pas encore été installée sur votre périphériqueiPhone/Android, un message vous invitant à installer l’application apparaîtra sur votre périphérique iPhone/Android (sauf pour le périphérique Android connecté...
  • Page 61: Paramètres Audio

    Pour régler le volume du micro Appuyez sur la molette M.C. pour afficher le menu principal. Tournez la molette M.C. pour sélectionner [MICROPHONE], puis appuyez à nouveau pour valider. Tournez la molette M.C. pour sélectionner [MIC VOL]. Tournez la molette M.C. pour régler le niveau de volume. REMARQUE En cas de hurlement lors de l’utilisation du micro, tenez ce dernier éloigné...
  • Page 62 Mode standard Vous pouvez créer un système de 4 enceintes avec des haut-parleurs avant et arrière ou des enceintes avant et des caissons de graves, ou bien un système de 6 enceintes avec des haut-parleurs avant et arrière et des caissons de graves. Réglage de la valeur de la fréquence de coupure et de la valeur de la pente Vous pouvez régler la valeur de la fréquence de coupure et la valeur de la pente pour...
  • Page 63: Réglages

    Mode réseau : [–6] à [–24] (si vous sélectionnez [HIGH], [MID HPF] ou [MID LPF]) [–12] à [–36] (si vous sélectionnez [SUBWOOFER]) Mode standard : [–6] à [–24] (si vous sélectionnez [FRONT] ou [REAR]) [–6] à [–36] (si vous sélectionnez [SUBWOOFER]) Réglages Vous pouvez régler divers paramètres dans le menu principal.
  • Page 64 Élément de menu Description REGIONAL [ON], [OFF] Limitez la réception des programmes régionaux spécifiques lorsque AF (recherche des autres fréquences) est sélectionné. (Disponible uniquement lorsque la bande FM est sélectionnée.) LOCAL FM : [OFF], [LV1], [LV2], [LV3], Restreignez la station d’accord suivant la [LV4] puissance du signal.
  • Page 65: Réglages Audio

    Lancez la lecture. STOP Arrêtez la lecture. Réglages AUDIO REMARQUE [CHK APP SETTG.] peut s’afficher lorsque le réglage est exécuté à partir de Pioneer Smart Sync. Élément de menu Description EQ SETTING [SUPER BASS], [POWERFUL], Sélectionnez ou personnalisez la courbe de [DYNAMIC], [NATURAL], [VOCAL], l’égaliseur.
  • Page 66 Élément de menu Description SUBWOOFER [ON], [OFF] Réglez sur [ON] lorsque vous utilisez un caisson de graves. SUBWOOFER*2 [NOR], [REV] Sélectionnez la phase du haut-parleur d’extrêmes graves. SPEAKER LEVEL Mode réseau : [HIGH L], [HIGH R], Sélectionnez une enceinte (filtre) et réglez le [MID L], [MID R], [SUBWOOFER] niveau de sortie.
  • Page 67 : [CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. • Les réglages qui peuvent être sauvegardés diffèrent lorsqu’une connexion Pioneer Smart Sync est établie. LOAD SETTINGS Téléchargez les paramètres audio, si vous avez déjà exécuté [SAVE SETTINGS].
  • Page 68: Réglages System

    CLOCK SET [12H], [24H] Réglez l’horloge (page 5). • Ce paramètre est indisponible si une connexion Pioneer Smart Sync est établie. BEEP TONE (Uniquement pour le mode standard) [ON], [OFF] Un signal sonore retentit si vous appuyez sur un bouton. Sélectionnez [OFF] pour désactiver cette fonction.
  • Page 69 Élément de menu Description INFO DISPLAY [SOURCE/SPEANA], [CLOCK/ Affichez l’élément sur l’affichage d’information SPEANA], [SRC/LIVE FX], [CLOCK/ secondaire. LIVE FX], [SOURCE], [SPEANA], • Lorsque [SOURCE/SPEANA] ou [CLOCK/ [OFF] SPEANA] sont sélectionnés, affichez l’antenne au lieu du Speana sur la source radio. AUTO PI [ON], [OFF] Recherchez une autre station avec la même...
  • Page 70 Veuillez utiliser [APP CONTROL] selon le tableau destiné à la source que vous souhaitez utiliser. Pour plus de détails sur la connexion Pioneer Smart Sync, voir page 18. Lorsque la connexion Pioneer Smart Sync n’est PAS établie Valeur de réglage Périphérique...
  • Page 71: Réglages Illumination

    Lorsque la connexion Pioneer Smart Sync est établie Valeur de réglage Périphérique Source(s) disponible(s) [WIRED] iPhone APP, SPOTIFY Android [BLUETOOTH] iPhone APP, SPOTIFY Android APP, SPOTIFY Réglages ILLUMINATION Élément de menu Description COLOUR [KEY COLOUR], [DISP COLOUR], Sélectionnez la couleur des touches ou de [BOTH COLOUR] l’affichage de l’appareil parmi 12 couleurs...
  • Page 72: Réglages Mixtrax

    – lorsqu’un appel est déjà en cours ; – quand le message reçu sur le périphérique est en cours de lecture lorsqu’une connexion Pioneer Smart Sync est établie – lorsque la face avant est fixée. L’effet d’éclairage s’active lorsque l’alimentation ACC est activée/désactivée, indépendamment...
  • Page 73: Réglages Microphone

    Élément de menu Description FLASH PATTERN [SOUND LEVEL 1] à [SOUND LEVEL Modifiez l’effet d’éclairage suivant le niveau sonore et le niveau des graves. Le modèle de clignotement change suivant le niveau sonore. [LOW PASS 1] à [LOW PASS 6] Le modèle de clignotement change suivant le niveau des graves.
  • Page 74: Informations Complémentaires

    à – Sélectionnez une autre étendue de votre revendeur ou à un centre lecture répétée. d’entretien agréé par Pioneer. Le son est intermittent. NO XXXX (ex. : NO TITLE) → Vous utilisez un périphérique, un →...
  • Page 75 – Transférez les fichiers audio vers le Ne connectez que des périphériques périphérique USB et procédez à la USB conformes. connexion. ERROR-19 → La sécurité est activée sur le → Panne de communication. périphérique USB connecté. – Effectuez l’une des opérations –...
  • Page 76 ACC ou ON. manipulation CONNECT APP Périphérique de stockage USB → La connexion Pioneer Smart Sync n’est • Les connexions via un concentrateur USB pas établie. ne sont pas prises en charge. – Connectez-vous à Pioneer Smart Sync •...
  • Page 77 Fichiers WAV dans le réglage multilingue • Il est impossible de connecter les formats PRÉCAUTION de fichier WAV via MTP. • Pioneer ne garantit pas la compatibilité Extension de fichier .wav avec tous les périphériques de stockage Bits de quantification 8 et 16 (LPCM) de masse USB et décline toute...
  • Page 78 • Livre audio, podcast : compatible dossiers lisibles (dans la pratique, la hiérarchie compte PRÉCAUTION moins de Pioneer n’accepte aucune responsabilité deux niveaux) en cas de perte de données sur l’iPhone, Dossiers lisibles Jusqu’à 1 500 même si la perte de données se produit Fichiers lisibles Jusqu’à...
  • Page 79 La marque de mot et les logos sont des marques déposées appartenant à Bluetooth SIG, Inc. et toute utilisation de ces marques par PIONEER CORPORATION est faite sous licence. Les autres marques de commerce ou noms commerciaux sont la propriété de leur propriétaire respectif.
  • Page 80 MARCHANDE ET D’ADÉQUATION À UNE marques de commerce de Google LLC. UTILISATION PARTICULIÈRE. EN AUCUN MIXTRAX CAS, LA FONDATION OU SES MIXTRAX est une marque commerciale de CONTRIBUTEURS NE POURRONT ÊTRE TENUS POUR RESPONSABLES DES PIONEER CORPORATION. - 42 -...
  • Page 81 Spotify® Panneau avant : 188 mm × 58 mm × SPOTIFY et le logo Spotify font partie des 16 mm marques déposées de Spotify AB. Des appareils numériques mobiles compatibles Châssis: 178 mm × 50 mm × 97 mm et un abonnement premium sont Panneau avant : 170 mm ×...
  • Page 82 Niveau des enceintes (mode standard) : Format de décodage WMA : Ver. 7, 8, 9, 9.1, +10 dB à -24 dB (par pas de 1 dB) 9.2 (2 canaux audio) Alignement en temps (mode standard) : Format de décodage AAC : MPEG-4 AAC 0 cm à...
  • Page 83 PBAP (Phone Book Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) 1.5 SPP (Serial Port Profile) 1.1 REMARQUE Les caractéristiques et la présentation peuvent être modifiées sans avis préalable. - 45 -...
  • Page 84 Sommario Operazioni preliminari ................3 Radio ......................8 USB/iPhone®/AUX..................9 Bluetooth ....................12 Spotify® ....................16 Utilizzare Pioneer Smart Sync/APP ........... 18 Uso della funzione Karaoke..............22 Regolazioni audio................. 23 Impostazioni..................25 Impostazioni FUNCTION..............25 Impostazioni AUDIO ................27 Impostazioni SYSTEM................30 Impostazioni ILLUMINATION ..............
  • Page 85: Operazioni Preliminari

    Operazioni preliminari Funzionamento di base MVH-S510BT Ghiera M.C. (multi-controllo) Porta USB SRC (sorgente)/OFF DISP (display) BAND/ Finestra di visualizzazione (navigazione)/LIST Pulsante di sgancio Jack di ingresso AUX (jack stereo da 3,5 mm) Operazioni frequenti Scopo Operazione Accendere l’alimentazione* Premere SRC/OFF per accendere l’alimentazione.
  • Page 86 Viene visualizzato quando è impostata la funzione di riproduzione ripetuta (fatta eccezione per quando è selezionato BT AUDIO come sorgente). Viene visualizzata in presenza di una connessione Bluetooth (pagina 12). Viene visualizzata in presenza di una connessione Pioneer Smart Sync (pagina 18). Rimozione del frontalino Staccare il frontalino per evitarne il furto.
  • Page 87 Reimpostazione del microprocessore Il microprocessore deve essere reimpostato nei seguenti casi: – Prima di utilizzare l’unità per la prima volta dopo l’installazione – Se l’unità non funziona correttamente – Se sul display vengono visualizzati messaggi anomali o errati Rimuovere il pannello anteriore (pagina 4). Premere il pulsante RESET con uno strumento appuntito più...
  • Page 88 Premere la ghiera M.C. per cancellare il messaggio. • Viene visualizzato un messaggio in cui si richiede di installare l’applicazione Pioneer Smart Sync sul dispositivo iPhone/Android collegando il dispositivo all’unità tramite USB. Viene visualizzato [QUIT :YES]. Per tornare alla prima voce del menu di configurazione, ruotare la ghiera M.C. per selezionare [QUIT :NO], quindi premere per confermare.
  • Page 89 Annullamento della visualizzazione di dimostrazione (DEMO OFF) Premere la ghiera M.C. per visualizzare il menu principale. Ruotare la ghiera M.C. per selezionare [SYSTEM], quindi premere per confermare. Ruotare la ghiera M.C. per selezionare [DEMO OFF], quindi premere per confermare. Ruotare la ghiera M.C. per selezionare [YES], quindi premere per confermare. Impostazioni INITIAL Tenere premuto SRC/OFF finché...
  • Page 90: Radio

    Radio Le frequenze del tuner sull’unità sono distribuite per l’utilizzo in Europa occidentale, Asia, Medio oriente, Africa e Oceania. L’utilizzo in altre aree può provocare una scarsa ricezione. La funzione RDS (radio data system) funziona solo nelle aree di trasmissione dei segnali RDS per le stazioni FM.
  • Page 91: Usb/Iphone®/Aux

    Per memorizzare manualmente le stazioni Durante la ricezione della stazione che si desidera memorizzare, tenere premuto uno dei pulsanti numerici (da 1/ a 6/ ) fino a quando non smette di lampeggiare. Utilizzo delle funzioni PTY L’unità cerca una stazione per informazione PTY (tipo di programma). Tenere premuto durante la ricezione FM.
  • Page 92 ATTENZIONE Utilizzare un cavo USB (venduto separatamente) per collegare il dispositivo USB in quanto ogni dispositivo collegato direttamente all’unità sporge e può risultare pericoloso. Prima di rimuovere il dispositivo, interrompere la riproduzione. Connessioni AOA Un dispositivo che esegue Android OS 4.1 o versioni successive e che supporta anche AOA (Android Open Accessory) 2.0 può...
  • Page 93 Per dettagli sulle impostazioni di MIXTRAX, consultare pagina 34. NOTE • Per utilizzare questa funzione, l’iPhone deve essere collegato con Pioneer Smart Sync tramite USB (pagina 18). • In base al file/brano, gli effetti sonori potrebbero non essere disponibili.
  • Page 94: Bluetooth

    Bluetooth Connessione Bluetooth Importante Se sono connessi dieci o più dispositivi Bluetooth (es. un telefono e un lettore audio separato), questi potrebbero non funzionare correttamente. La connessione successiva all’unità viene eseguita automaticamente se il dispositivo Bluetooth è stato collegato in precedenza nei seguenti punti. Attivare la funzione Bluetooth del dispositivo.
  • Page 95 Importante • Lasciare l’unità in standby per la connessione al telefono via Bluetooth mentre il motore è spento può causare l’esaurimento della batteria del veicolo. • Assicurarsi di aver parcheggiato il veicolo in un luogo sicuro e inserire il freno di stazionamento prima di eseguire l’operazione.
  • Page 96 Per dettagli sulle funzioni di riconoscimento vocale, fare riferimento al manuale in dotazione con il dispositivo. Quando viene effettuata una connessione Pioneer Smart Sync (pagina 18), è anche possibile utilizzare la funzione di riconoscimento vocale da Pioneer Smart Sync installato sul dispositivo iPhone/Android tenendo premuto .
  • Page 97 Voce del menu Descrizione PHONE BOOK Visualizzare i contatti presenti nel telefono. PRESET 1-6 Richiamare i numeri di telefono preimpostati. È inoltre possibile richiamare i numeri di telefono preimpostati premendo uno dei tasti numerici (da 1/ a 6/ A.ANSR* Selezionare [ON] per risponde automaticamente a una chiamata in entrata.
  • Page 98: Spotify

    (Non è disponibile quando [USB MTP] è impostato su [ON] nelle impostazioni SYSTEM (pagina 31).) Spotify è un servizio di distribuzione musicale in streaming non affiliato con Pioneer. Maggiori informazioni sono disponibili alla pagina http://www.spotify.com. L’applicazione Spotify è disponibile per gli smartphone compatibili. Per informazioni aggiornate sulla compatibilità, visitare la pagina https://support.spotify.com/.
  • Page 99 Google Play™. Scegliere un account gratuito o Premium a pagamento, all’interno della app o su spotify.com. Un account Premium offre molte più funzioni, come ad esempio l’ascolto offline. Importante • Questo prodotto include il software Spotify soggetto a licenze di terze parti consultabili qui: www.spotify.com/connect/third-party-licenses.
  • Page 100: Utilizzare Pioneer Smart Sync/App

    Per dettagli sulle operazioni disponibili nell’applicazione, consultare la sezione di supporto dell’applicazione. NOTA La sorgente APP non è disponibile quando non viene effettuata una connessione Pioneer Smart Sync o quando [USB MTP] è impostato su [ON] nelle impostazioni SYSTEM (pagina 31). - 18 -...
  • Page 101 Per gli utenti iPhone Questa funzione è compatibile con iOS 10.3 o versioni successive. È possibile scaricare Pioneer Smart Sync da iTunes App Store. Per gli utenti di dispositivi Android Questa funzione è compatibile con i dispositivi con sistema operativo Android OS 5.0 o successivo installato.
  • Page 102 – Controllare il dispositivo Bluetooth collegato Ampliare le funzioni dell’unità grazie all’uso dell’applicazione Le seguenti funzioni, che non sono disponibili sulla sola unità, sono disponibili effettuando una connessione a Pioneer Smart Sync. Voce del menu (esempio) Descrizione Usare un’applicazione di navigazione È...
  • Page 103 • L’impostazione 31 Band EQ viene convertita in 13 bande quando viene coinvolta una sorgente musicale proveniente da questo prodotto. Per cercare l’applicazione, si consiglia di immettere il termine di ricerca “Pioneer Smart Sync” nel campo dedicato. Effettuare una connessione con Pioneer Smart Sync Premere la ghiera M.C.
  • Page 104: Uso Della Funzione Karaoke

    • Nel caso in cui l’applicazione Pioneer Smart Sync non sia ancora stata installata sul dispositivo iPhone/Android, viene visualizzato un messaggio che richiede di installare l’applicazione sul dispositivo iPhone/Android (fatta eccezione per il dispositivo Android connesso via Bluetooth). Selezionare [OFF] in [AUTO APP CONN] per annullare il messaggio (pagina 31).
  • Page 105: Regolazioni Audio

    Ruotare la ghiera M.C. per regolare il livello del volume. NOTA Se si verificano rumori di disturbo quando si utilizza il microfono, tenere il microfono lontano dall’altoparlante o abbassare il volume del microfono. Per ridurre il livello della voce in un brano Premere la ghiera M.C.
  • Page 106 Regolazione della frequenza di cutoff e del valore di pendenza È possibile regolare il valore della frequenza di cutoff e il valore di pendenza per ogni altoparlante. È possibile regolare i seguenti altoparlanti. Modalità di rete: [HIGH] (altoparlante high range HPF), [MID HPF] (altoparlante middle rande HPF), [MID LPF] (altoparlante middle range LPF), [SUBWOOFER] Modalità...
  • Page 107: Impostazioni

    Da [–6] a [–24] (se si sceglie [FRONT] o [REAR]) Da [–6] a [–36] (se si sceglie [SUBWOOFER]) Impostazioni È possibile regolare diverse impostazioni nel menu principale. Premere la ghiera M.C. per visualizzare il menu principale. Ruotare la ghiera M.C. per selezionare una delle seguenti categorie, quindi premere per confermare.
  • Page 108 Voce del menu Descrizione LOCAL FM: [OFF], [LV1], [LV2], [LV3], [LV4] Limitare la stazione di sintonizzazione in base MW/LW: [OFF], [LV1], [LV2] alla potenza del segnale. [ON], [OFF] Ricevere le informazioni correnti sul traffico, se disponibili. (Disponibile solo con banda FM selezionata.) [ON], [OFF] Consentire all’unità...
  • Page 109: Impostazioni Audio

    Impostazioni AUDIO NOTA Potrebbe essere visualizzato [CHK APP SETTG.] quando l’impostazione viene eseguita da Pioneer Smart Sync. Voce del menu Descrizione EQ SETTING [SUPER BASS], [POWERFUL], Selezionare o personalizzare la curva di [DYNAMIC], [NATURAL], [VOCAL], equalizzazione. [VIVID], [SET BY APP]*, •...
  • Page 110 Voce del menu Descrizione SPEAKER LEVEL Modalità di rete: [HIGH L], [HIGH Selezionare un’unità altoparlante (filtro) e R], [MID L], [MID R], [SUBWOOFER] regolare il livello di output. Modalità standard: [FRONT L], • Ogni valore regolato cambia quando si [FRONT R], [REAR L], [REAR R], modifica l’impostazione [POSITION](pagina 28).
  • Page 111 [CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. • Le impostazioni che possono essere salvate variano in presenza di una connessione Pioneer Smart Sync. LOAD SETTINGS Caricare le impostazioni audio, dopo aver eseguito [SAVE SETTINGS].
  • Page 112: Impostazioni System

    [DEU](Tedesco) CLOCK SET [12H], [24H] Impostare l’orologio (pagina 6). • Questa impostazione non è disponibile quando viene effettuata una connessione Pioneer Smart Sync. BEEP TONE (solo per la modalità standard) [ON], [OFF] Quando si preme un pulsante, è possibile udire un bip.
  • Page 113 è su [ON]. • APP, SPOTIFY, iPhone e USB (AOA) AUTO APP CONN [ON], [OFF] Selezionare [ON] per avviare automaticamente Pioneer Smart Sync quando all’unità è collegato un dispositivo iPhone/Android. USB AUTO [ON], [OFF] Selezionare [ON] per passare automaticamente alla sorgente USB quando un dispositivo USB/ iPhone è...
  • Page 114 Le sorgenti disponibili variano in base al valore dell’impostazione. Impostare [APP CONTROL] in base alla tabella per la sorgente che si desidera utilizzare. Per dettagli sulla connessione Pioneer Smart Sync, consultare pagina 18. Quando la connessione Pioneer Smart Sync NON viene eseguita...
  • Page 115: Impostazioni Illumination

    Impostazioni ILLUMINATION Voce del menu Descrizione COLOUR [KEY COLOUR], [DISP COLOUR], Selezionare il colore per i tasti/display dell’unità [BOTH COLOUR] tra i 12 colori preimpostati, [SCAN] o [CUSTOM]*. • [SCAN]: consente di percorrere automaticamente una vasta gamma di colori. • [CUSTOM]*: 1 Tenere premuta la ghiera M.C.
  • Page 116: Impostazioni Mixtrax

    [FLASHING] è selezionato in [PHONE COLOUR] – si sta effettuando una chiamata – il messaggio ricevuto sul dispositivo viene letto in presenza di una connessione Pioneer Smart Sync – il pannello frontale è fissato. L’effetto di illuminazione si attiva quando l’alimentazione ACC viene accesa/spenta,...
  • Page 117: Impostazioni Microphone

    Voce del menu Descrizione FLASH PATTERN Da [SOUND LEVEL 1] a [SOUND Cambiare l’effetto luminoso in base al livello LEVEL 6] audio e dei bassi. L’effetto lampeggiante cambia in base al livello audio. Da [LOW PASS 1] a [LOW PASS 6] L’effetto lampeggiante cambia in base al livello dei bassi.
  • Page 118: Informazioni Aggiuntive

    ON. Se il messaggio rimane, contattare secondarie quando è selezionato [FLD] il rivenditore o una Stazione di servizio (ripetizione cartella). Pioneer per ottenere assistenza. – Selezionare un altro range di riproduzione ripetuta. NO XXXX (NO TITLE, a esempio) → Non sono presenti informazioni di testo Il suono è...
  • Page 119 – Trasferire i file audio al dispositivo USB – Effettuare una delle seguenti ed effettuare la connessione. operazioni, quindi tornare alla → Il dispositivo USB connesso ha la sorgente USB. sicurezza abilitata. • Scollegare il dispositivo USB. – Attenersi alle istruzioni del dispositivo •...
  • Page 120 Pioneer Smart Sync. • Fissare saldamente il dispositivo di – Effettuare una connessione con archiviazione USB prima di guidare. Non Pioneer Smart Sync (pagina 18). lasciar cadere il dispositivo di archiviazione USB sul pavimento, in Spotify quanto potrebbe incastrarsi sotto il pedale del freno o dell’acceleratore.
  • Page 121 • I formati file WAV non possono essere nell’impostazione multilingue collegati via MTP. ATTENZIONE Estensione file .wav • Pioneer non può garantire la Bit di quantizzazione 8 e 16 (LPCM) compatibilità con tutti i dispositivi di Frequenza di Da 16 kHz a 48 kHz...
  • Page 122 • Audiolibri, Podcast: compatibile all’avvio della riproduzione dei file audio ATTENZIONE su un dispositivo di archiviazione USB Pioneer declina ogni responsabilità per la con numerose gerarchie di cartelle. perdita di dati sull’iPhone, anche se i dati Gerarchia cartella Fino a otto livelli (una vengono persi durante l’utilizzo dell’unità.
  • Page 123 File audio Il marchio nominale e il logo sono compresso marchi registrati di proprietà di Bluetooth SIG, Inc. e sono utilizzati in licenza da PIONEER CORPORATION. Tutti gli altri marchi registrati e marchi nominali sono marchi dei rispettivi proprietari. iTunes Apple ed iTunes sono marchi di fabbrica di Apple Inc., registrati negli Stati Uniti...
  • Page 124 E DI IDONEITÀ PER UNO SCOPO PARTICOLARE. IN NESSUN CASO LA MIXTRAX FONDAZIONE O ALTRI SOGGETTI CHE MIXTRAX è un marchio registrato di PIONEER CORPORATION. HANNO PRESTATO IL LORO CONTRIBUTO SARANNO RESPONSABILI PER EVENTUALI Spotify® DANNI DIRETTI, INDIRETTI, ACCIDENTALI O...
  • Page 125 Frequenza: 25 Hz/31,5 Hz/40 Hz/50 Specifiche Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Generali Pendenza: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/ Alimentazione: 14,4 V CC (da 10,8 V a 15,1 V oct, OFF consentiti) Fase: normale/inversa Sistema di messa a terra: tipo negativo...
  • Page 126 MSC (Mass Storage Class) Banda di frequenza: da 2 400 MHz a 2 483,5 MTP (Media Transfer Protocol) AOA (Android Open Accessory) 2.0 Profili Bluetooth: File system: FAT12, FAT16, FAT32 GAP (Generic Access Profile) Formato di decodifica MP3: MPEG-1 e 2 SDAP (Service Discovery Application Audio Layer 3 Profile)
  • Page 127 Procedimientos iniciales ................ 3 Radio ......................7 USB/iPhone®/AUX..................9 Bluetooth ....................12 Spotify® ....................16 Uso de Pioneer Smart Sync/APP............18 Uso de la función Karaoke ..............22 Ajustes de audio ................... 23 Ajustes ....................25 Ajustes de FUNCTION................25 Ajustes de AUDIO ..................
  • Page 128: Procedimientos Iniciales

    Procedimientos iniciales Funcionamiento básico MVH-S510BT Selector M.C. (control múltiple) Puerto USB SRC (fuente)/OFF DISP (visualización) BAND/ Visor (navegación)/LIST Botón de extracción Toma de entrada AUX (toma estéreo de 3,5 mm) Operaciones más frecuentes Función Operación Encendido* Pulse SRC/OFF para encender la unidad.
  • Page 129 Aparece al ajustar la reproducción repetida (excepto si BT AUDIO está seleccionado como fuente). Aparece si se establece una conexión Bluetooth (página 12). Aparece si se establece una conexión Pioneer Smart Sync (página 18). Extracción del frontal Extraiga el frontal para evitar robos. Desconecte todos los cables y dispositivos conectados al frontal y apague la unidad antes de extraerlo.
  • Page 130 – Cuando aparezcan mensajes extraños o incorrectos en la pantalla Extraiga el panel frontal (página 4). Pulse el botón RESET con un instrumento puntiagudo superior a 8 mm. Botón RESET Menú de configuración Al situar el contacto en ON después de la instalación, aparece el menú de configuración en el visor.
  • Page 131 [USB CONN. SET] aparece una vez realizados todos los ajustes. Presione el selector M.C. para borrar el mensaje. • Aparece un mensaje que le pide que instale la aplicación Pioneer Smart Sync en su iPhone/dispositivo Android conectando el dispositivo a la unidad mediante USB.
  • Page 132: Radio

    Gire el selector M.C. para seleccionar [DEMO OFF] y, a continuación, presione para confirmar. Gire el selector M.C. para seleccionar [YES] y, a continuación, presione para confirmar. Ajustes de INITIAL Mantenga pulsado SRC/OFF hasta que se apague la unidad. Mantenga pulsado SRC/OFF para mostrar el menú principal. Gire el selector M.C.
  • Page 133 posible que la recepción no sea correcta. La función RDS (Radio Data System) solo funciona en áreas en las que se emiten señales RDS correspondientes a emisoras FM. Recepción de emisoras memorizadas Pulse SRC/OFF para seleccionar [RADIO]. Pulse BAND/ para seleccionar la banda entre las opciones [FM1], [FM2], [FM3], [MW] o [LW].
  • Page 134: Usb/Iphone®/Aux

    Utilización de las funciones de PTY La unidad busca una emisora según la información de PTY (tipo de programa). Mantenga pulsado durante la recepción de FM. Gire el selector M.C. para seleccionar un tipo de programa entre las opciones [NEWS/INFO], [POPULAR], [CLASSICS] y [OTHERS]. Presione el selector M.C..
  • Page 135 Conexiones AOA Puede conectar a la unidad un dispositivo con Android OS 4.1 o una versión posterior y compatible con AOA (Android Open Accessory) 2.0 a través de AOA, utilizando el cable suministrado con el dispositivo. NOTA Si utiliza una conexión AOA, [APP CONTROL] debe estar ajustado en [WIRED] (página 31) y [USB MTP] en [OFF] (página 31) en los ajustes de SYSTEM.
  • Page 136 MIXTRAX, consulte la página 33. NOTAS • El iPhone debe conectarse a Pioneer Smart Sync mediante USB para usar esta función (página 18). • En función del archivo o la canción, es posible que los efectos de sonido no estén disponibles.
  • Page 137: Bluetooth

    Bluetooth Conexión Bluetooth Importante Si hay diez dispositivos Bluetooth o más (como un teléfono o un reproductor de audio independiente) conectados, es posible que no funcionen correctamente. SUGERENCIA La siguiente conexión con la unidad se realiza automáticamente si el dispositivo Bluetooth se ha conectado anteriormente en los siguientes pasos.
  • Page 138 • Antes de realizar estas operaciones, asegúrese de aparcar el vehículo en un lugar seguro y aplicar el freno de estacionamiento. Para realizar una llamada telefónica Pulse para ver el menú del teléfono. Si hay dos teléfonos conectados, primero aparece el nombre del teléfono y después un menú...
  • Page 139 Para obtener información sobre las funciones de reconocimiento de voz, consulte el manual suministrado con su dispositivo. SUGERENCIA Cuando se establece una conexión Pioneer Smart Sync (página 18), también puede usar la función de reconocimiento de voz desde Pioneer Smart Sync instalado en su iPhone/dispositivo Android manteniendo pulsado .
  • Page 140 Opción del menú Descripción A.ANSR* Seleccione [ON] para responder una llamada entrante automáticamente. [ON], [OFF] PB INVT Invierta el orden de los nombres de la agenda (vista de nombre). DEVICELIST Muestra la lista de dispositivos Bluetooth emparejados. Aparece “*” en el nombre del dispositivo cuando se ha establecido la conexión Bluetooth.
  • Page 141: Spotify

    (página 31).) Spotify es un servicio de distribución de música en streaming que no está afiliado a Pioneer. Más información disponible en http://www.spotify.com. La aplicación de Spotify está disponible para teléfonos compatibles. Visite https:// support.spotify.com/ para consultar la información sobre compatibilidad más reciente.
  • Page 142 Importante • Este producto incorpora el software Spotify, que está sujeto a licencias de terceros que puede consultar aquí: www.spotify.com/connect/third-party-licenses. • Para obtener información acerca de los países y regiones donde se puede utilizar Spotify, consulte https://www.spotify.com/us/select-your-country/. Escuchar Spotify Actualice el firmware de la aplicación Spotify a la última versión antes de utilizarla. Conecte el dispositivo móvil a esta unidad.
  • Page 143: Uso De Pioneer Smart Sync/App

    NOTA La fuente APP no está disponible si no se ha establecido una conexión Pioneer Smart Sync o si [USB MTP] está ajustado en [ON] en los ajustes de SYSTEM (página 31).
  • Page 144 Para usuarios de iPhone Esta función es compatible con iOS 10.3 o una versión posterior. Puede descargar Pioneer Smart Sync en iTunes App Store. Para usuarios de dispositivos Android Esta función es compatible con dispositivos que tengan instalado Android OS 5.0 o una versión posterior.
  • Page 145 – Control de su dispositivo Bluetooth conectado Ampliación de las funciones de la unidad utilizando la aplicación Las siguientes funciones, no disponibles en la unidad por sí sola, están disponibles al establecer una conexión Pioneer Smart Sync. Opción del menú (ejemplo) Descripción Uso de una aplicación de navegación...
  • Page 146 • El ajuste del EQ de 31 bandas se convierte a 13 bandas cuando se activa una fuente de música de este producto. SUGERENCIA Se recomienda introducir el término de búsqueda Pioneer Smart Sync en el campo de búsqueda para buscar la aplicación. Cómo realizar una conexión con Pioneer Smart Sync Presione el selector M.C.
  • Page 147: Uso De La Función Karaoke

    • Si Pioneer Smart Sync no está instalado en su iPhone/dispositivo Android, aparece un mensaje que le pide que instale la aplicación en su iPhone/dispositivo Android (excepto en el caso de un dispositivo Android conectado a través de Bluetooth).
  • Page 148: Ajustes De Audio

    Para ajustar el volumen del micrófono Presione el selector M.C. para que aparezca el menú principal. Gire el selector M.C. para seleccionar [MICROPHONE] y, a continuación, presione para confirmar. Gire el selector M.C. para seleccionar [MIC VOL]. Gire el selector M.C. para ajustar el nivel de volumen. NOTA Si se producen acoples al usar el micrófono, aléjelo del altavoz o baje el volumen del micrófono.
  • Page 149 Ajuste del valor de frecuencia de corte y el valor de curva Puede ajustar el valor de frecuencia de corte y el valor de curva de cada altavoz. Se pueden ajustar los siguientes altavoces. Modo de red: [HIGH] (HPF del altavoz de gama alta), [MID HPF] (HPF del altavoz de gama media), [MID LPF] (LPF del altavoz de gama media), [SUBWOOFER] Modo estándar: [FRONT], [REAR], [SUBWOOFER]...
  • Page 150: Ajustes

    de [–6] a [–24] (si selecciona [FRONT] o [REAR]) de [–6] a [–36] (si selecciona [SUBWOOFER]) Ajustes Puede ajustar diferentes valores en el menú principal. Presione el selector M.C. para que aparezca el menú principal. Gire el selector M.C. para seleccionar una de las categorías siguientes y, a continuación, presione para confirmar.
  • Page 151 Opción del menú Descripción LOCAL FM: [OFF], [LV1], [LV2], [LV3], [LV4] Limita las emisoras sintonizadas en función de la MW/LW: [OFF], [LV1], [LV2] intensidad de la señal. [ON], [OFF] Recibe la información de tráfico actual, si está disponible. (Disponible solo si se selecciona la banda FM.) [ON], [OFF] Permite a la unidad volver a sintonizar una...
  • Page 152: Ajustes De Audio

    Ajustes de AUDIO NOTA Es posible que aparezca [CHK APP SETTG.] cuando el ajuste se realiza desde Pioneer Smart Sync. Opción del menú Descripción EQ SETTING [SUPER BASS], [POWERFUL], Seleccione o personalice la curva del ecualizador. [DYNAMIC], [NATURAL], [VOCAL], • Cuando selecciona un ajuste distinto de...
  • Page 153 [CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. • Los ajustes que pueden guardarse varían cuando se establece una conexión Pioneer Smart Sync. LOAD SETTINGS Permite cargar la configuración de sonido cuando ya ha pulsado en [SAVE SETTINGS].
  • Page 154: Ajustes De System

    [TUR](Turco), [FRA](Francés), información de texto de un archivo de audio [DEU](Alemán) comprimido. CLOCK SET [12H], [24H] Ajuste el reloj (página 5). • Este ajuste no está disponible cuando se establece una conexión Pioneer Smart Sync. - 29 - - 29 -...
  • Page 155 Opción del menú Descripción BEEP TONE (Solo en el modo estándar) [ON], [OFF] Se podrá escuchar un pitido cada vez que pulse un botón. Seleccione [OFF] para desactivar esta función. INFO DISPLAY [SOURCE/SPEANA], [CLOCK/ Muestra el elemento de la pantalla de SPEANA], [SRC/LIVE FX], [CLOCK/ información secundaria.
  • Page 156 Las fuentes disponibles varían en función del valor de configuración. Establezca [APP CONTROL] en función de la tabla para la fuente que desee usar. Para obtener más información sobre la conexión Pioneer Smart Sync, consulte la página 18. Cuando NO hay una conexión Pioneer Smart Sync...
  • Page 157: Ajustes De Illumination

    Valor de Dispositivo Fuentes disponibles configuración [BLUETOOTH] iPhone iPhone, SPOTIFY Android SPOTIFY Cuando hay una conexión Pioneer Smart Sync Valor de Dispositivo Fuentes disponibles configuración [WIRED] iPhone APP, SPOTIFY Android [BLUETOOTH] iPhone APP, SPOTIFY Android APP, SPOTIFY Ajustes de ILLUMINATION Opción del menú...
  • Page 158: Ajustes De Mixtrax

    – está realizando una llamada – el mensaje recibido en el dispositivo se está leyendo cuando se establece una conexión Pioneer Smart Sync – el panel frontal está colocado. El efecto de iluminación se activa cuando se activa/desactiva ACC, independientemente de este ajuste.
  • Page 159: Ajustes De Microphone

    Opción del menú Descripción FLASH AREA [KEY/DISPLAY], [KEY], [OFF] Seleccione la zona del efecto de iluminación. Si se ha seleccionado [OFF], el color definido en los ajustes de ILLUMINATION (página 32) se utiliza como color del visor. FLASH PATTERN De [SOUND LEVEL 1] a [SOUND Modifique el efecto de iluminación con arreglo LEVEL 6] al nivel de sonido y de graves.
  • Page 160: Información Complementaria

    [FLD] (repetición de carpeta). con su distribuidor o con un centro de – Seleccione otro intervalo de la asistencia Pioneer autorizado para reproducción repetida. obtener ayuda. El sonido es intermitente. NO XXXX (NO TITLE, por ejemplo) →...
  • Page 161 Conecte solo dispositivos USB NO AUDIO compatibles. → No hay canciones. – Transfiera archivos de audio al ERROR-19 dispositivo USB y conéctelo. → Error en la comunicación. → El dispositivo USB conectado tiene la – Realice una de las operaciones protección activada.
  • Page 162 ACC u ON. pantalla. Instrucciones de manipulación CONNECT APP → La conexión Pioneer Smart Sync no se ha establecido. Dispositivo de almacenamiento – Establezca una conexión con Pioneer Smart Sync (página 18). • No están permitidas las conexiones a Spotify través de concentradores USB.
  • Page 163 Extensión del archivo .wav PRECAUCIÓN Bits de cuantificación 8 y 16 (LPCM) • Pioneer no garantiza la compatibilidad Frecuencia de De 16 kHz a 48 kHz con todos los dispositivos de muestreo (LPCM) almacenamiento masivo USB y no asume...
  • Page 164 • Audiolibro, podcast: compatible dos niveles) PRECAUCIÓN Carpetas Hasta 1 500 reproducibles Pioneer declina toda responsabilidad por Archivos Hasta 15 000 la pérdida de datos del iPhone, aunque la reproducibles pérdida se produzca durante la utilización de esta unidad.
  • Page 165 Bluetooth La marca literal y los logotipos marcas registradas propiedad de Bluetooth SIG, Inc., y cualquier uso de dichas marcas por PIONEER CORPORATION se hace bajo licencia. Otras marcas y nombres comerciales son propiedad de sus respectivos propietarios. iTunes Apple e iTunes son marcas comerciales de Apple Inc., registradas en los EE.UU.
  • Page 166 Corporation en los Estados Unidos y/u INCLUYE, A TÍTULO MERAMENTE otros países. ENUNCIATIVO, LA PRESTACIÓN DE Este producto incluye tecnología PRODUCTOS O SERVICIOS DE propiedad de Microsoft Corporation, y no SUSTITUCIÓN, LA PÉRDIDA DE DATOS, se puede usar ni distribuir sin una licencia BENEFICIOS O POSIBILIDADES DE de Microsoft Licensing, Inc.
  • Page 167 MIXTRAX MIXTRAX es una marca comercial de Bastidor: 178 mm × 50 mm × 97 mm PIONEER CORPORATION. Cara anterior: 188 mm × 58 mm × 16 Spotify® SPOTIFY y el logotipo de Spotify se Bastidor: 178 mm × 50 mm × 97 mm encuentran entre las marcas registradas de Cara anterior: 170 mm ×...
  • Page 168 Nivel del altavoz (Modo estándar): Formato de decodificación MP3: MPEG-1 & de +10 dB a –24 dB (pasos de 1 dB) 2 Audio Layer 3 Alineación temporal (Modo estándar): Formato de descodificación WMA: ver. 7, 8, de 0 cm a 350 cm (2,5 cm/paso) 9, 9.1, 9.2 (audio de 2 canales) Filtro de paso alto (HIGH) (Modo de red): Formato de decodificación AAC: MPEG-4...
  • Page 169 SDAP (Perfil de aplicación de descubrimiento de servicio) HFP (Perfil manos libres) 1.6 PBAP (Perfil de acceso a la agenda telefónica) A2DP (Perfil de distribución de audio avanzado) AVRCP (Perfil de control remoto de audio/vídeo) 1.5 SPP (Perfil de puerto de serie) 1.1 NOTA Las especificaciones y el diseño están sujetos a modificaciones sin previo aviso.
  • Page 170 Inhaltsverzeichnis Erste Schritte .................... 3 Radio ......................8 USB/iPhone®/AUX..................9 Bluetooth ....................12 Spotify® ....................17 Verwenden von Pioneer Smart Sync/APP ........19 Verwenden der Karaoke-Funktion............ 22 Audioanpassungen................23 Einstellungen ..................25 FUNCTION-Einstellungen ..............25 AUDIO-Einstellungen ................27 SYSTEM-Einstellungen ................. 30 ILLUMINATION-Einstellungen.............
  • Page 171: Erste Schritte

    Erste Schritte Grundlagen der Bedienung MVH-S510BT M.C.-(Mehrfunktions-)Regler USB-Anschluss SRC (Quelle)/OFF DISP (Display) BAND/ Anzeigefenster (Navigation)/LIST Entriegelungstaste AUX-Eingangsbuchse (3,5-mm-Stereobuchse) Häufig verwendete Bedienvorgänge Zweck Bedienung Gerät einschalten* Drücken Sie SRC/OFF, um das Gerät einzuschalten. Halten Sie SRC/OFF gedrückt, um das Gerät auszuschalten.
  • Page 172 Erscheint, wenn die Wiedergabewiederholung eingeschaltet ist (außer wenn BT AUDIO als Quelle ausgewählt ist). Erscheint, wenn eine Bluetooth-Verbindung hergestellt wird (Seite 12). Erscheint, wenn eine Pioneer Smart Sync-Verbindung hergestellt wird (Seite 19). Abnehmen des Bedienfelds Nehmen Sie das Bedienfeld ab, um einen Diebstahl zu verhindern. Ziehen Sie am Bedienfeld befestigte Kabel und Geräte ab und schalten Sie das Gerät aus, bevor Sie das...
  • Page 173 – Bevor Sie das Gerät nach der Installation zum ersten Mal verwenden – Wenn das Gerät nicht ordnungsgemäß funktioniert – Wenn merkwürdige oder falsche Meldungen im Display erscheinen Entfernen Sie das Bedienfeld (Seite 4). Drücken Sie die RESET-Taste mit einem spitzen Gegenstand, der länger als 8 mm ist.
  • Page 174 Drücken Sie den M.C.-Regler, um die Nachricht zu löschen. • Wenn Sie Ihr iPhone/Android-Gerät über USB an das Gerät anschließen, wird eine Nachricht angezeigt, die Sie zur Installation der Pioneer Smart Sync-App auffordert. [QUIT :YES] erscheint. Um zum ersten Eintrag des Einrichtungsmenüs zurückzukehren, drehen Sie den M.C.-Regler, um [QUIT :NO] auszuwählen, und drücken Sie ihn dann, um den...
  • Page 175 Abbrechen der Demoanzeige (DEMO OFF) Drehen Sie den M.C.-Regler, um das Hauptmenü anzuzeigen. Drehen Sie den M.C.-Regler, um [SYSTEM] auszuwählen, und drücken Sie ihn dann, um den Vorgang zu bestätigen. Drehen Sie den M.C.-Regler, um [DEMO OFF] auszuwählen, und drücken Sie ihn dann, um den Vorgang zu bestätigen.
  • Page 176: Radio

    Radio Die Empfangsfrequenzen dieses Geräts sind für die Nutzung in Westeuropa, Asien, dem Nahen Osten, Afrika und Ozeanien vorgesehen. Eine Nutzung in anderen Regionen kann zu schlechtem Empfang führen. Die RDS-Funktion (Radio Data System: Datenfunksystem) funktioniert nur in Regionen, die RDS-Signale für FM-Sender übertragen.
  • Page 177: Usb/Iphone®/Aux

    HINWEIS [SEEK] muss in den FUNCTION-Einstellungen auf [MAN] eingestellt sein (Seite 26). Sender manuell speichern Halten Sie, während Sie den zu speichernden Sender empfangen, eine der Zifferntasten (1/ bis 6/ ) gedrückt, bis sie zu blinken aufhört. Verwenden von PTY-Funktionen Das Gerät sucht anhand von PTY-Informationen (Programmtyp) nach einem Sender.
  • Page 178 HINWEIS Um automatisch zur USB-Quelle zu wechseln, wenn ein USB-Gerät/iPhone an dieses Gerät angeschlossen ist, setzen Sie [USB AUTO] in den SYSTEM-Einstellungen auf [ON] (Seite 32). VORSICHT Verwenden Sie ein USB-Kabel (separat erhältlich), um das USB-Gerät anzuschließen, da jedes direkt am Gerät angeschlossene externe Gerät aus dem Gerät herausragen wird, was gefährlich sein könnte.
  • Page 179 Mix Ihrer Musikbibliothek. Einzelheiten zu den MIXTRAX-Einstellungen finden Sie auf Seite 34. HINWEISE • Das iPhone muss über USB mit dem Pioneer Smart Sync verbunden sein, um diese Funktion zu verwenden (Seite 19). • Je nach Datei/Titel sind möglicherweise keine Klangeffekte verfügbar.
  • Page 180: Bluetooth

    Drücken Sie 3/MIX, um MIXTRAX ein-/auszuschalten. Bluetooth Bluetooth-Verbindung Wichtig Wenn zehn oder mehr Bluetooth-Geräte verbunden sind (z. B. ein Telefon und ein separater Audioplayer), funktionieren sie möglicherweise nicht ordnungsgemäß. TIPP Die nächste Verbindung zum Gerät wird automatisch hergestellt, wenn das Bluetooth-Gerät zuvor anhand der folgenden Schritte verbunden war.
  • Page 181 Bluetooth-Telefon Stellen Sie als Erstes eine Bluetooth-Verbindung zum Bluetooth-Telefon her (Seite 12). Es können bis zu zwei Bluetooth-Telefone gleichzeitig angeschlossen sein. Wichtig • Wenn Sie das Gerät im Standby-Modus lassen, um Ihr Telefon über Bluetooth anzuschließen, während der Motor ausgeschaltet ist, kann sich die Fahrzeugbatterie entladen. •...
  • Page 182 HINWEIS Einzelheiten zu den Spracherkennungsfunktionen finden Sie im Handbuch Ihres Geräts. TIPP Wenn eine Pioneer Smart Sync-Verbindung hergestellt wird (Seite 19), können Sie auch die Spracherkennungsfunktion von Pioneer Smart Sync verwenden, das auf dem iPhone/Android-Gerät installiert ist, indem Sie gedrückt halten. Ausführliche Informationen zu den Spracherkennungsfunktionen finden Sie in der Hilfe der Anwendung.
  • Page 183 Menüpunkt Beschreibung RECENTS Die Liste der entgangenen Anrufe anzeigen. [MISSED] [DIALLED] Die Liste der getätigten Anrufe anzeigen. [RECEIVED] Die Liste der empfangenen Anrufe anzeigen. PHONE BOOK Zeigen Sie die Kontakte in Ihrem Telefon an. PRESET 1-6 Die Kurzwahlnummern abrufen. Sie können die Kurzwahlnummern auch durch Drücken einer der Zifferntasten bis 6/ ) abrufen.
  • Page 184 • Wenn der Bluetooth-Audioplayer verwendet wird, können Sie keine automatische Verbindung zu einem Bluetooth-Telefon herstellen. • Abhängig vom Typ des an diesem Gerät angeschlossenen Bluetooth-Audioplayers können die Bedienung und die angezeigten Informationen entsprechend der Verfügbarkeit und Funktionalität variieren. Stellen Sie eine Bluetooth-Verbindung zum Bluetooth-Audioplayer her. Drücken Sie SRC/OFF, um [BT AUDIO] als Quelle auszuwählen.
  • Page 185: Spotify

    (Nicht verfügbar, wenn [USB MTP] in den SYSTEM-Einstellungen auf [ON] gesetzt ist (Seite 32).) Spotify ist ein Musikstreaming-Dienst, der nicht mit Pioneer verbunden ist. Weitere Informationen sind unter http://www.spotify.com verfügbar. Die Spotify-Anwendung ist für kompatible Smartphones verfügbar, bitte besuchen Sie https://support.spotify.com/, um die neuesten Kompatibilitätsinformationen zu...
  • Page 186 Grundlegende Bedienvorgänge In den FUNCTION-Einstellungen können Sie verschiedene Anpassungen vornehmen (Seite 25). HINWEIS Welche Vorgänge verfügbar sein, kann je nach der Art des abzuspielenden Inhalts (Titel/Album/ Interpret/Playlist/Radio) variieren. Zweck Bedienung Track überspringen Drücken Sie bzw. 1 Halten Sie In einer Liste nach einem Titel suchen gedrückt, um die Liste anzuzeigen.
  • Page 187: Verwenden Von Pioneer Smart Sync/App

    Einzelheiten zu den in der Anwendung zur Verfügung stehenden Bedienvorgängen finden Sie im Hilfe-Abschnitt der Anwendung. HINWEIS Die Quelle APP ist nicht verfügbar, wenn keine Pioneer Smart Sync-Verbindung hergestellt wurde oder [USB MTP] in den SYSTEM-Einstellungen auf [ON] gesetzt ist (Seite 32). WARNUNG Versuchen Sie nicht, die Anwendung zu bedienen, während Sie fahren.
  • Page 188 Navigations-App festlegen und starten. Nachricht vorlesen Sie können sich Nachrichten vorlesen lassen, die Sie über die auf Ihrem Gerät installierten Apps erhalten haben. 31-Band-EQ-Einstellung Sie können ein Equalizer-Band im grafischen 31-Band-Equalizer auswählen (13-Band ohne Verwendung der Pioneer Smart Sync-Verbindung). - 20 -...
  • Page 189 • Die 31-Band-EQ-Einstellung wird in 13 Bänder umgewandelt, wenn eine Musikquelle dieses Produkts verwendet wird. TIPP Es wird empfohlen, den Suchbegriff „Pioneer Smart Sync” in das Suchfeld einzugeben, um nach der Anwendung zu suchen. Herstellen einer Verbindung mit Pioneer Smart Sync Drehen Sie den M.C.-Regler, um das Hauptmenü...
  • Page 190: Verwenden Der Karaoke-Funktion

    HINWEIS Unabhängig davon, ob die [AUTO APP CONN]-Einstellung auf [ON] oder [OFF] gesetzt ist, können Sie auch Folgendes ausführen, um Pioneer Smart Sync zu starten. • Für andere Geräte als das über USB verbundene Android-Gerät drücken Sie SRC/ OFF, um eine beliebige Quelle auszuwählen, und halten Sie dann den M.C.-Regler gedrückt.
  • Page 191: Audioanpassungen

    – RADIO – AUX IN Stecken Sie den Stereo-Ministecker des Mikrofons in den AUX-Eingang. Drücken Sie den M.C.-Regler, um das Hauptmenü anzuzeigen. Drehen Sie den M.C.-Regler, um [MICROPHONE] auszuwählen. Drücken Sie den M.C.-Regler, um [ON] auszuwählen. Wenn der Karaokemodus aktiviert ist, ist die Lautstärke des Geräts stumm geschaltet.
  • Page 192 Betriebsmodi Dieses Gerät hat zwei Betriebsmodi: den Netzwerk- und den Standardmodus. Sie können Ihren Anforderungen entsprechend zwischen den Modi umschalten (Seite 6). Netzwerkmodus Sie können ein 2-Wege-SW-System mit mehreren Verstärkern und Lautsprechern erstellen, das einen Hochton- und einen Mitteltonlautsprecher und einen Subwoofer hat, um hohe, mittlere und tiefe Frequenzen (Bänder) wiederzugeben.
  • Page 193: Einstellungen

    Drehen Sie den M.C.-Regler, um eine geeignete Grenzfrequenz für die in Schritt 4 ausgewählte Lautsprechereinheit (den Filter) auszuwählen, und drücken Sie ihn dann, um den Vorgang zu bestätigen. Netzwerkmodus: [1.25K] bis [12.5K] (wenn Sie [HIGH] oder [MID LPF] wählen) [25] bis [250] (wenn Sie [MID HPF] oder [SUBWOOFER] wählen) Standardmodus: [25HZ] bis [250HZ] Drehen Sie den M.C.-Regler, um eine geeignete Steilheit für die in Schritt 4...
  • Page 194 Menüpunkt Beschreibung FM SETTING [TALK], [STANDARD], [MUSIC] Die Klangqualität auf die Sendesignalbedingungen des FM-Band-Signals abstimmen. (Nur verfügbar, wenn das FM-Band ausgewählt ist). Die sechs stärksten Sender automatisch auf den Zifferntasten (1/ bis 6/ ) speichern. REGIONAL [ON], [OFF] Den Empfang auf bestimmte Regionalprogramme beschränken, wenn AF (alternative Frequenzsuche) ausgewählt ist.
  • Page 195: Audio-Einstellungen

    Ein auf der Liste enthaltenes Bluetooth-Gerät anschließen. PLAY Wiedergabe starten. STOP Wiedergabe beenden. AUDIO-Einstellungen HINWEIS Möglicherweise wird [CHK APP SETTG.] angezeigt, wenn die Einstellung über Pioneer Smart Sync vorgenommen wird. Menüpunkt Beschreibung EQ SETTING [SUPER BASS], [POWERFUL], Equalizer-Kurve auswählen oder anpassen. [DYNAMIC], [NATURAL], [VOCAL], •...
  • Page 196 Menüpunkt Beschreibung FADER*1 (Nur für Standardmodus) Balance der Front- und Hecklautsprecher einstellen. BALANCE Balance der linken und rechten Lautsprecher einstellen. SUBWOOFER [ON], [OFF] Stellen Sie hier bei Verwendung eines Subwoofer-Lautsprechers [ON] ein. SUBWOOFER*2 [NOR], [REV] Auswahl der Subwoofer-Phase. SPEAKER LEVEL Netzwerkmodus: [HIGH L], Wählen Sie eine Lautsprechereinheit (einen [HIGH R], [MID L], [MID R],...
  • Page 197 [CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. • Die Einstellungen, die gespeichert werden können, variieren, wenn eine Pioneer Smart Sync-Verbindung hergestellt wird. LOAD SETTINGS Die Toneinstellungen laden, wenn Sie [SAVE SETTINGS] bereits durchgeführt haben.
  • Page 198: System-Einstellungen

    CLOCK SET [12H], [24H] Einstellung der Uhr (Seite 6). • Diese Einstellung ist nicht verfügbar, wenn eine Pioneer Smart Sync-Verbindung hergestellt wurde. BEEP TONE (Nur für Standardmodus) [ON], [OFF] Wenn eine Taste gedrückt wird, ertönt ein Piepton. Wählen Sie [OFF], um diese Funktion zu deaktivieren.
  • Page 199 Menüpunkt Beschreibung INFO DISPLAY [SOURCE/SPEANA], [CLOCK/ Den Eintrag im Subinformationsdisplay SPEANA], [SRC/LIVE FX], [CLOCK/ anzeigen. LIVE FX], [SOURCE], [SPEANA], • Wenn [SOURCE/SPEANA] oder [CLOCK/ [OFF] SPEANA] ausgewählt ist, zeigen Sie die Antenne anstelle des Spektrumanalysators in der Radioquelle an. AUTO PI [ON], [OFF] Auch bei Verwendung eines voreingestellten Senders nach einem anderen Sender mit...
  • Page 200 Informationen zu den Anschlüssen für jedes Gerät Die verfügbaren Quellen variieren abhängig vom Einstellungswert. Stellen Sie [APP CONTROL] entsprechend der Tabelle für die zu verwendende Quelle ein. Einzelheiten zur Pioneer Smart Sync-Verbindung finden Sie auf Seite 19. Wenn KEINE Pioneer Smart Sync-Verbindung durchgeführt wird Einstellwert Gerät...
  • Page 201: Illumination-Einstellungen

    Wenn eine Pioneer Smart Sync-Verbindung durchgeführt wird Einstellwert Gerät Verfügbare Quelle(n) [WIRED] iPhone APP, SPOTIFY Android [BLUETOOTH] iPhone APP, SPOTIFY Android APP, SPOTIFY ILLUMINATION-Einstellungen Menüpunkt Beschreibung COLOUR [KEY COLOUR], [DISP COLOUR], Auswahl der Farbe für die Tasten/das Display des [BOTH COLOUR] Geräts aus 12 voreingestellten Farben, [SCAN]...
  • Page 202: Mixtrax-Einstellungen

    – ein Anruf eingeht, wenn [FLASHING] unter [PHONE COLOUR] ausgewählt ist – Sie telefonieren – die auf dem Gerät empfangene Nachricht vorgelesen wird, wenn eine Pioneer Smart Sync-Verbindung besteht – das Bedienfeld angebracht ist. Ungeachtet dieser Einstellung wird der Beleuchtungseffekt beim Ein-/Ausschalten der ACC-Stromversorgung aktiviert.
  • Page 203: Microphone-Einstellungen

    Menüpunkt Beschreibung FLASH PATTERN [SOUND LEVEL 1] bis [SOUND Anpassung des Beleuchtungseffekts an den LEVEL 6] Ton- und Basspegel. Das Blinkmuster ändert sich anhand des Tonpegels. [LOW PASS 1] bis [LOW PASS 6] Das Blinkmuster ändert sich anhand des Basspegels. [RANDOM1] Das Blinkmuster ändert sich zufällig anhand von Tonpegel- und Tiefpassmodus.
  • Page 204: Zusätzliche Informationen

    Wiederholbereich aus. weiter angezeigt werden, wenden Sie sich zur Unterstützung an Ihren Der Ton wird unterbrochen. → Sie verwenden ein Gerät wie z. B. ein Händler oder eine Pioneer- Mobiltelefon, das hörbare Störungen Kundendienststelle. verursachen kann. NO XXXX (beispielsweise NO TITLE) –...
  • Page 205 → Das angeschlossene USB-Gerät hat – Warten Sie, bis die Meldung erlischt und Sie den Ton hören. einen höheren als den maximal zulässigen Stromverbrauch. NO AUDIO – Trennen Sie das USB-Gerät ab und → Es sind keine Musiktitel vorhanden. verwenden Sie es nicht. Schalten Sie –...
  • Page 206 → Ein unbekannter Fehler (einschließlich Kommunikationsfehler) ist aufgetreten. – Folgen Sie den auf dem Bildschirm CONNECT APP gezeigten Anweisungen. → Es besteht keine Pioneer Smart Sync- Verbindung. Handhabungsrichtlinien – Stellen Sie eine Verbindung mit Pioneer Smart Sync her (Seite 19).
  • Page 207 Sprachoptionen auf Russisch eingestellt nicht erkannt. – Möglicherweise werden Dateien nicht VORSICHT richtig wiedergegeben. • Pioneer kann nicht die Kompatibilität mit – Das Gerät kann Störgeräusche allen USB-Massenspeichergeräten verursachen, wenn Sie Radio hören. gewährleisten und übernimmt keine Verantwortung für eventuelle...
  • Page 208 MP3i (MP3 interaktiv), Nicht kompatibel Abspielbare Bis zu acht Ebenen mp3 PRO Ordnerstruktur (Praktikabel sind weniger als zwei Ebenen.) WAV-Dateien Abspielbare Ordner Bis zu 1 500 • WAV-Datenformate können nicht über Abspielbare Dateien Bis zu 15 000 MTP verbunden werden. Wiedergabe von Nicht kompatibel Dateierweiterung...
  • Page 209 Marken Bluetooth -Wortmarke und -Logos sind eingetragene Marken der Bluetooth SIG, Inc. 01 bis 05: Ordnernummer Jede Nutzung dieser Marken durch die PIONEER : Wiedergabereihenfolge CORPORATION erfolgt unter entsprechender Lizenz. Andere Marken und Markennamen sind das Eigentum ihrer jeweiligen Inhaber.
  • Page 210 Corporation in den USA und/oder anderen KEINESFALLS FÜR DIREKTE, INDIREKTE, Ländern. BEILÄUFIG ENTSTANDENE, BESONDERE, Dieses Produkt enthält Technologie, die STRAFRECHTLICHE ODER FOLGESCHÄDEN Eigentum der Microsoft Corporation ist (EINSCHLIESSLICH OHNE BESCHRÄNKUNG und nicht ohne Lizenz von Microsoft VERSCHAFFEN VON ERSATZGÜTERN ODER Licensing, Inc.
  • Page 211 Technische Daten Google, Google Play und Android sind Markenzeichen der Google LLC. Allgemeines MIXTRAX Stromspannung: 14,4 V Gleichspannung MIXTRAX ist eine Marke der PIONEER (Toleranz 10,8 V bis 15,1 V) CORPORATION. Erdungssystem: Negativ Spotify® Maximale Leistungsaufnahme: 10,0 A SPOTIFY und das Spotify-Logo sind Abmessungen (B ×...
  • Page 212 Frequenz: 25 Hz/31,5 Hz/40 Hz/50 Hz/ USB Protokoll: 63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/ MSC (Massenspeicher-Klasse) 200 Hz/250 Hz MTP (Media Transfer Protocol) Flanke: –6 dB/Okt., –12 dB/Okt., – AOA (Android Open Accessory) 2.0 18 dB/Okt., –24 dB/Okt., –30 dB/Okt., Dateisystem: FAT12, FAT16, FAT32 –36 dB/Okt., AUS MP3-Decodierformat: MPEG-1 &...
  • Page 213 Frequenzband/-bänder: 2 400 MHz bis 2 483,5 MHz Bluetooth-Profile: GAP (Generic Access Profile) SDAP (Service Discovery Application Profile) HFP (Hands Free Profile) 1.6 PBAP (Phone Book Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) 1.5 SPP (Serial Port Profile) 1.1 HINWEIS Änderungen der technischen Daten und des Designs vorbehalten.
  • Page 214 Inhoud Aan de slag ....................3 Radio ......................8 USB/iPhone®/AUX..................9 Bluetooth ....................12 Spotify® ....................16 Pioneer Smart Sync/APP gebruiken ..........18 De karaokefunctie gebruiken ............22 Audio aanpassen .................. 23 Instellingen.................... 24 FUNCTION-instellingen................ 25 AUDIO-instellingen................26 SYSTEM-instellingen................29 ILLUMINATION-instellingen ..............
  • Page 215: Aan De Slag

    Aan de slag Basisbediening MVH-S510BT M.C.-knop (multicontrole) USB-poort SRC (bron)/OFF DISP (display) BAND/ Display (navigatie)/LIST Ontkoppelknop AUX-ingang (3,5mm-stereoaansluiting) Vaak gebruikte functies Actie Bediening Toestel inschakelen* Druk op SRC/OFF om het toestel in te schakelen. Hou SRC/OFF ingedrukt om het toestel uit te schakelen.
  • Page 216 Verschijnt wanneer weergave herhalen is ingesteld (behalve wanneer BT AUDIO is geselecteerd als bron). Verschijnt wanneer een Bluetooth-verbinding is gemaakt (pagina 12). Verschijnt wanneer een Pioneer Smart Sync-verbinding is gemaakt (pagina 18). Het voorpaneel verwijderen Verwijder het voorpaneel om diefstal te voorkomen. Verwijder alle kabels en apparaten die verbonden zijn met het voorpaneel en schakel het toestel uit voor u het voorpaneel verwijdert.
  • Page 217 – Vooraleer dit toestel voor het eerst na de installatie wordt gebruikt – Als het toestel niet goed werkt – Wanneer vreemde of foutieve berichten op het display verschijnen Verwijder het voorpaneel (pagina 4). Druk op de RESET knop met een scherp voorwerp langer dan 8 mm. RESET-knop Instellingenmenu Wanneer u de contactschakelaar inschakelt na de installatie, verschijnt het...
  • Page 218 [USB CONN. SET] verschijnt als alle instellingen uitgevoerd zijn. Druk op de M.C.-knop om de melding te wissen. • Een melding met de vraag om de Pioneer Smart Sync-applicatie te installeren verschijnt op uw iPhone/Android-apparaat door uw apparaat op het toestel aan te sluiten via USB.
  • Page 219 De demonstratieweergave annuleren (DEMO OFF) Druk op de M.C.-knop om het hoofdmenu weer te geven. Draai aan de M.C.-knop om [SYSTEM] te selecteren, druk daarna op de knop om te bevestigen. Draai aan de M.C.-knop om [DEMO OFF] te selecteren, druk daarna op de knop om te bevestigen.
  • Page 220: Radio

    Radio De tunerfrequenties van dit toestel zijn bedoeld voor gebruik in West-Europa, Azië, het Midden-Oosten, Afrika en Oceanië. Bij gebruik in andere regio's kan de ontvangst zwak zijn. De functie RDS (Radio Data System) werkt alleen in regio's die RDS-signalen voor FM-zenders uitzenden.
  • Page 221: Usb/Iphone®/Aux

    Zenders handmatig opslaan Terwijl u de zender ontvangt die u wilt opslaan, houdt u een van de cijfertoetsen tot 6/ ) ingedrukt tot hij niet meer knippert. PTY-functies gebruiken Het toestel zoekt naar een zender op basis van de PTY (programmatype)-informatie. Houd ingedrukt tijdens FM-ontvangst.
  • Page 222 LET OP Gebruik een USB-kabel (apart verkrijgbaar) om het USB-apparaat aan te sluiten, omdat elk apparaat dat rechtstreeks op het toestel aangesloten wordt, uitsteekt uit het toestel, wat gevaarlijk kan zijn. Voor u het apparaat loskoppelt, dient u de weergave te stoppen. AOA-verbindingen Een apparaat met daarop Android OS 4.1 of recenter en dat tevens AOA (Android Open Accessory) 2.0 ondersteunt, kan worden aangesloten op het toestel via AOA met behulp...
  • Page 223 Raadpleeg pagina 33 voor meer informatie over MIXTRAX- instellingen. OPMERKINGEN • Om deze functie te gebruiken, moet de iPhone via USB zijn aangesloten op Pioneer Smart Sync (pagina 18). • Afhankelijk van het bestand/de song zijn geluidseffecten mogelijk niet beschikbaar.
  • Page 224: Bluetooth

    Bluetooth Bluetooth-verbinding Belangrijk Als er tien of meer Bluetooth-apparaten (bv. een telefoon en een aparte audiospeler) zijn aangesloten, is het mogelijk dat ze niet goed werken. De volgende verbinding met het toestel wordt in de volgende stappen automatisch tot stand gebracht als het Bluetooth-apparaat eerder gekoppeld is geweest.
  • Page 225 Telefoneren Druk op om het telefoonmenu weer te geven. Wanneer twee telefoons verbonden zijn, verschijnt eerst een telefoonnaam en vervolgens een telefoonmenu. Om naar een andere telefoon te schakelen, drukt u nogmaals op Draai aan de M.C.-knop om [RECENTS] of [PHONE BOOK] te selecteren en druk vervolgens op de knop om te bevestigen.
  • Page 226 Voor meer informatie over de mogelijkheden van spraakherkenning raadpleegt u de handleiding die bij uw apparaat is meegeleverd. Wanneer een Pioneer Smart Sync-verbinding is gemaakt (pagina 18), dan kunt u tevens de functie spraakherkenning gebruiken vanaf Pioneer Smart Sync die op uw iPhone/Android-apparaat geïnstalleerd is door...
  • Page 227 Menu-item Beschrijving PB INVT Keer de volgorde van de namen in het telefoonboek om (naamweergave). DEVICELIST Geef de lijst met gekoppelde Bluetooth-apparaten weer. “*” verschijnt bij de apparaatnaam wanneer de Bluetooth- verbinding tot stand is gebracht. Als er geen apparaat geselecteerd is in de apparaatlijst, is deze functie niet beschikbaar.
  • Page 228: Spotify

    (Niet beschikbaar wanneer [USB MTP] is ingesteld op [ON] in de SYSTEM-instellingen (pagina 31).) Spotify is een verspreidingsservice voor muziekstreaming die niet aangesloten is bij Pioneer. Meer informatie vindt u op http://www.spotify.com. De Spotify-toepassing is beschikbaar voor compatibele telefoons. Raadpleeg https:// support.spotify.com/ voor de recentste informatie over compatibiliteit.
  • Page 229 Luisteren naar Spotify Update de firmware van Spotify naar de recentste versie voor u de applicatie gebruikt. Verbind dit toestel met het mobiele apparaat. • iPhone via USB (pagina 9) • iPhone/Android-apparaat via Bluetooth (pagina 12) Druk op SRC/OFF om [SPOTIFY] te selecteren. Houd 1/ ingedrukt om [APP CONTROL] weer te geven.
  • Page 230: Pioneer Smart Sync/App Gebruiken

    Pioneer Smart Sync is de applicatie die op intelligente wijze uw kaarten, berichten en muziek in het voertuig samenbrengt. U kunt het toestel bedienen via een Pioneer Smart Sync die geïnstalleerd is op een iPhone/Android-apparaat. In sommige gevallen kunt u via het toestel bepaalde functies van de toepassing gebruiken, zoals bronselectie, pauzeren enz.
  • Page 231 Voor gebruikers van Android-apparaten Deze functie is compatibel met apparaten waarop Android OS 5.0 of recenter geïnstalleerd is. U kunt Pioneer Smart Sync downloaden op Google Play. OPMERKING Sommige Android-apparaten die via AOA 2.0 verbonden zijn, werken mogelijk niet goed of produceren geluiden ten gevolge van hun eigen softwareontwerp, ongeacht de OS-versie.
  • Page 232 • De 31-band EQ-instelling wordt geconverteerd naar 13 banden wanneer een muziekbron van dit product wordt gebruikt. Het wordt aanbevolen om in het zoekveld het zoekargument “Pioneer Smart Sync” in te vullen om naar de applicatie te zoeken. - 20 -...
  • Page 233 • Wanneer u een ander mobiel apparaat dan een iPhone/Android-apparaat aansluit, dan hangt het van uw mobiele apparaat af of het correct functioneert. • Als Pioneer Smart Sync nog niet op uw iPhone/Android-apparaat geïnstalleerd is, verschijnt een melding om de applicatie te installeren op uw iPhone/Android-apparaat (behalve voor het Android- apparaat dat gekoppeld is via Bluetooth).
  • Page 234: De Karaokefunctie Gebruiken

    De karaokefunctie gebruiken WAARSCHUWING • De bestuurder mag nooit zingen met een microfoon terwijl hij/zij aan het rijden is. Hierdoor kan een ongeval worden veroorzaakt. • Om ongevallen te voorkomen mag u de microfoon niet laten slingeren. LET OP Het is uiterst gevaarlijk als de draad van de microfoon rond de stuurkolom, het rempedaal of de versnellingshendel wordt gewikkeld.
  • Page 235: Audio Aanpassen

    Draai de M.C.-knop om [MICROPHONE] te selecteren en druk daarna op de knop om te bevestigen. Draai de M.C.-knop om [VOCAL] te selecteren. Druk op de M.C.-knop om [OFF] te selecteren. OPMERKING Afhankelijk van de opname-omstandigheden van nummers kan het niveau van de stemmen mogelijk minder goed gereduceerd worden.
  • Page 236: Instellingen

    Druk op de M.C.-knop om het hoofdmenu weer te geven. Draai aan de M.C.-knop om [AUDIO] te selecteren en druk vervolgens op de knop om te bevestigen. Draai aan de M.C.-knop om [CROSSOVER] te selecteren en druk vervolgens op de knop om te bevestigen.
  • Page 237: Function-Instellingen

    • SYSTEM-instellingen (pagina 29) • ILLUMINATION-instellingen (pagina 32) • MIXTRAX-instellingen (pagina 33) • MICROPHONE-instellingen (pagina 34) Draai de M.C.-knop om de opties te selecteren, druk daarna op de knop om te bevestigen. FUNCTION-instellingen De menu-items zijn afhankelijk van de bron. Menu-item Beschrijving FM SETTING...
  • Page 238: Audio-Instellingen

    Verwijder de songinformatie die opgeslagen is in [SAVE]. SEL DEVICE iPhone Verbind een Bluetooth-apparaat in de lijst. PLAY Start de weergave. STOP Stop de weergave. AUDIO-instellingen OPMERKING [CHK APP SETTG.] kan weergegeven worden wanneer de instelling wordt uitgevoerd vanaf Pioneer Smart Sync. - 26 -...
  • Page 239 [CUSTOM1]. equalizercurve, die niet in het toestel aanwezig is, is ingesteld vanaf Pioneer Smart Sync. Selecteer een equalizerband en - niveau voor verdere aanpassing. Equalizerband: [50HZ] tot [12.5kHZ] Equalizerniveau: [–6] tot [+6]...
  • Page 240 [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. • De instellingen die kunnen worden opgeslagen, zijn verschillend wanneer een Pioneer Smart Sync-verbinding gemaakt is. LOAD SETTINGS Laad de geluidsinstellingen wanneer u [SAVE SETTINGS] reeds heeft uitgevoerd. - 28 -...
  • Page 241: System-Instellingen

    Selecteer de taal om tekstinformatie van een [TUR](Turks), [FRA](Frans), gecomprimeerd audiobestand weer te geven. [DEU](Duits) CLOCK SET [12H], [24H] Stel de klok in (pagina 6). • Deze instelling is niet beschikbaar wanneer een Pioneer Smart Sync-verbinding gemaakt is. - 29 - - 29 -...
  • Page 242 Menu-item Beschrijving BEEP TONE (Alleen voor standaardmodus) [ON], [OFF] U kunt een pieptoon horen wanneer een knop wordt ingedrukt. Selecteer [OFF] om deze functie uit te schakelen. INFO DISPLAY [SOURCE/SPEANA], [CLOCK/ Geef het item weer op het sub-informatiedisplay. SPEANA], [SRC/LIVE FX], [CLOCK/ •...
  • Page 243 De beschikbare bronnen zijn verschillend afhankelijk van de instelwaarde. Stel [APP CONTROL] in volgens de tabel van de bron die u wilt gebruiken. Raapleeg pagina 18 voor meer informatie over Pioneer Smart Sync-verbindingen. Wanneer de Pioneer Smart Sync-verbinding NIET wordt uitgevoerd...
  • Page 244: Illumination-Instellingen

    Wanneer de Pioneer Smart Sync-verbinding wordt uitgevoerd Instelwaarde Apparaat Beschikbare bron(nen) [WIRED] iPhone APP, SPOTIFY Android [BLUETOOTH] iPhone APP, SPOTIFY Android APP, SPOTIFY ILLUMINATION-instellingen Menu-item Beschrijving COLOUR [KEY COLOUR], [DISP COLOUR], Kies de kleur voor de knoppen/het display van [BOTH COLOUR] het toestel uit 12 voorgeprogrammeerde kleuren, [SCAN] of [CUSTOM]*.
  • Page 245: Mixtrax-Instellingen

    – er een inkomende oproep is wanneer [FLASHING] in [PHONE COLOUR] geselecteerd – u een gesprek voert; – de melding die op het apparaat ontvangen is, gelezen wordt wanneer een Pioneer Smart Sync-verbinding gemaakt is – het voorpaneel bevestigd is. Het verlichtingseffect wordt geactiveerd wanneer het contact van het voertuig (ACC) in-/ uitgeschakeld wordt, ongeacht deze instelling.
  • Page 246: Microphone-Instellingen

    Menu-item Beschrijving FLASH PATTERN [SOUND LEVEL 1] tot [SOUND Wijzig het verlichtingseffect volgens het LEVEL 6] geluids- en basniveau. Het flitspatroon wijzigt volgens het geluidsniveau. [LOW PASS 1] tot [LOW PASS 6] Het flitspatroon wijzigt volgens het basniveau. [RANDOM1] Het flitspatroon wijzigt willekeurig volgens de geluidsniveaumodus en de laag- doorlaatmodus.
  • Page 247: Aanvullende Informatie

    – Plaats elektrische apparaten die de Pioneer Servicecentrum. storing kunnen veroorzaken, verder NO XXXX (bijvoorbeeld NO TITLE) weg van het toestel. → Er is geen ingebedde tekstinformatie.
  • Page 248 USB-apparaat/iPhone – Controleer of de USB-stekker en de USB-kabel niet ergens ingeklemd of FORMAT READ beschadigd zijn. → Soms is er een vertraging tussen het → Het aangesloten USB-apparaat begin van de weergave en wanneer u verbruikt meer stroom dan de maximaal het geluid begint te horen.
  • Page 249 USB-opslagapparaat • Het maken van verbindingen via een CONNECT APP USB-hub wordt niet ondersteund. → Pioneer Smart Sync-verbinding is niet • Maak het USB-apparaat stevig vast gemaakt. voordat u gaat rijden. Zorg dat het USB- – Maak een verbinding met Pioneer apparaat niet op de vloer valt omdat het Smart Sync (pagina 18).
  • Page 250 PRO gebruikt en op Russisch zijn ingesteld bij de taalinstellingen WAV-bestanden LET OP • WAV-bestandsindelingen kunnen niet • Pioneer garandeert geen compatibiliteit worden gebruikt via MTP. met alle USB-opslagapparaten en kan Bestandsextensie .wav niet verantwoordelijk worden gesteld Kwantisatiebits...
  • Page 251 • Audiobook, Podcast: Compatibel twee niveaus gebruiken) LET OP Afspeelbare mappen Maximaal 1 500 Pioneer is niet verantwoordelijk voor verlies van gegevens op de iPhone, ook Afspeelbare Tot 15 000 bestanden niet tijdens het gebruik van dit toestel. - 39 -...
  • Page 252 Copyright en handelsmerken Bluetooth Het merk en de logo’s daarvan zijn gedeponeerde handelsmerken van Bluetooth SIG, Inc. PIONEER CORPORATION gebruikt deze onder licentie. Andere handelsmerken en handelsnamen zijn eigendom van de respectieve eigenaren. iTunes Apple en iTunes zijn handelsmerken van Apple Inc., geregistreerd in de V.S.
  • Page 253 MIXTRAX VERLEEND, INCLUSIEF MAAR NIET BEPERKT MIXTRAX is een handelsmerk van de TOT IMPLICIETE GARANTIES VAN VERKOOPBAARHEID EN GESCHIKTHEID PIONEER CORPORATION. VOOR EEN BEPAALD DOEL. IN GEEN GEVAL Spotify® KUNNEN DE STICHTING OF HAAR SPOTIFY en het Spotify-logo zijn BIJDRAGERS AANSPRAKELIJK WORDEN...
  • Page 254 AB. Compatibel mobiel digitaal apparaat Voorkant: 170 mm × 46 mm × 16 mm en premium-abonnement vereist indien Gewicht: 0,5 kg beschikbaar; zie https://www.spotify.com. Audio T-Kernel 2.0 Maximaal uitgangsvermogen: Dit product maakt gebruik van de • 50 W × 4 kan./4 Ω (zonder broncode van T-Kernel 2.0 onder T-License subwoofer) 2.0 verleend door het T-Engine Forum...
  • Page 255 Frequentie: 1,25 kHz / 1,6 kHz / 2 kHz / FLAC decodeerformaat: v1.2.1 (Free 2,5 kHz/ 3,15 kHz / 4 kHz / 5 kHz / 6,3 Lossless Audio Codec) kHz / 8 kHz / 10 kHz / 12,5 kHz WAV-signaalformaat: lineaire PCM (niet Helling: -6 dB/oct, -12 dB/oct, -18 dB/ gecomprimeerd) oct, -24 dB/oct...
  • Page 256 OPMERKING Technische gegevens en ontwerp kunnen zonder voorafgaande kennisgeving worden gewijzigd. - 44 -...
  • Page 257 © 2018 PIONEER CORPORATION. All rights reserved. © 2018 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés. <QRI3045-A> EW...

Table of Contents