Table of Contents
Advertisement
DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
8
Maintenance
8.1
General Information
Maintenance
8.2
LCD Display
The operator terminals VDP 16.1/40.1/60.1 are maintenance-free. However,
some components are subject to wear and must be replaced.
NOTICE
The IP degree of protection must be guaranteed during maintenance!
NOTICE
If screws were removed because of maintenance works, they must be fastened
again with the corresponding mounting torque (see the following table).
Threads
M2.5
M3
M4
M5
Fig.8-1:
Mounting torques
Include the following measures in the maintenance schedule:
●
Clean the screen at least once a week using an antistatic fabric or a
cleansing agent containing alcohol.
CAUTION
●
Do not use any solvents (e. g. diluents)!
●
Do not use high pressure cleaning devices!
●
At least once a year, check all plug and terminal connections of the com‐
ponents regarding proper tightness and possible damage. Check that
cables are not broken or crushed. Replace damaged parts immediately.
●
Check the fan at least once a year, if existent.
DANGER
The fan impeller must not to be touched with the hands and must not come into
contact with other objects.
A fading backlight causes a progressive deterioration of the readability of the
LCD display, so that a backlight exchange is necessary. For further information
please contact the Bosch Rexroth Service, see also
Support" on page
65.
Bosch Rexroth AG
Loss of IP degree of protection due to incorrect
maintenance.
Damage of the mechanics caused by wrong
mounting torque.
Mounting torques
0.4 Nm
0.7 Nm
1.4 Nm
2.8 Nm
The surface of the foil as well as the display
cover are dissolved by solvents!
Risk of injury by rotating fan impeller!
chapter 12 "Service and
55/69
Maintenance
Advertisement
Table of Contents
