Identification Mode - Bodet KELIO VISIO Instructions Manual

5.2 Identification mode

The following display appears on the screen:
Press the BIO key.
The following display appears on the screen:
Press the ENROLE key.
The following display appears on the screen if the
terminal does not have a Mifare reader:
Otherwise, the B
selected. XXX is the number of fingerprints that
can still be stored in the terminal.
Press the CODE key.
The following display appears on the screen:
Enter the employee's badge number (or ID
number, depending on the option selected in the
software configuration of the Installation module).
The following display appears on the screen:
Press the E key if your surname and your first
name are displayed.
The following display appears on the screen:
Place your finger.
The following display appears on the screen:
Remove your finger.
Place and remove the finger as many times as requested.
XXX is the quality of the enrolment executed out of 100. If the score obtained is less than 85, it is
recommended to re-enrol.
mode is automatically
ADG
SETUP
COM TEST BIO
BIOMETRY
ENROLL DEL
ENROLMENT
BADG CODE LIST
ENTER BADGE NUMBER
SELECTION OF EMPLOYEE + E
ASTON SALLY
PLACE YOUR FINGER
REMOVE YOUR FINGER
XX
QUIT
QUIT
XXX
QUIT
QUIT
QUIT
QUIT
QUIT