Enrolment; Authentication Mode - Bodet KELIO VISIO Instructions Manual

5. ENROLMENT

Before you can clock using the biometric sensor, you must "enrol" yourself. To do so, enter the 4-
digit code using the biometric terminal keypad (configured in the Installation Module of the Kelio
software, H > T
ARDWARE

5.1 Authentication mode

The following display appears on the screen:
Press the BIO key.
The following display appears on the screen:
Press the ENROLE key.
The following display appears on the screen if
the terminal does not have a Mifare reader:
Otherwise,
automatically selected.
XXX is the number of fingerprints that can still
be stored in the terminal.
Press the BADGE key.
The following display appears on the screen:
Swipe your badge.
The following display appears on the screen:
Press the OK key if your surname and your
first name are displayed.
The following display appears on the screen:
Place your finger.
The following display appears on the screen:
Remove your finger.
Place and remove the finger as many times as requested. XXX is the quality of the enrolment
executed out of 100. If the score obtained is less than 85, it is recommended to re-enrol.
> S > M
ERMINALS ITES AINTENANCE
the "BADG" mode
) menu, then press E.
SETUP
COM TEST
BIOMETRY
ENROLLED DEL
ENROLMENT
BADG CODE LIST
is
IDENTIFY YOURSELF
SALLY ASTON
PREV NEXT
PLACE YOUR FINGER
REMOVE YOUR FINGER
XX
BIO QUIT
QUIT
XXX
QUIT
QUIT
OK QUIT
QUIT
QUIT