Reader's Connection - Bodet KELIO VISIO Instructions Manual

-
Secure the cables using the tightening collars [R].
-
Put the protection plate back into place [C].
-
Re-install the front panel at the back of the terminal.
-
If necessary and before closing the casing, power up to
adjust/configure the terminal (see page 7 in these
instructions).
-
Remove the protection sheet from the front.
-
The terminal is ready to be used.

4.4 Reader's connection

Wired reader
Connect the reader to the USB port on the activity V
Wireless reader
Connect the reader support to the USB port on the activity V
Follow the start-up instructions for the wireless reader provided with it.
R
R
.
ISIO
.
ISIO
R
R