Approvals And Certifications - Danfoss VLT Series Operating Instructions Manual

Introduction

1.4 Approvals and Certifications

Table 1.2 Approvals and Certifications
More approvals and certifications are available. Contact
local Danfoss partner.
Applied standards and compliance
Use of Safe Torque Off on terminal 37 requires that the
user satisfies all provisions for safety including relevant
laws, regulations and guidelines. The integrated STO
function complies with the following standards:
•
IEC 60204-1: 2005 Stop category 0 – uncontrolled
stop
•
EN 60204-1: 2006 Stop category 0 – uncontrolled
stop
•
IEC/EN 61508: 2010 SIL2
•
IEC/EN 61800-5-2:2007
•
IEC/EN 62061: 2005 SIL CL2
•
ISO 13849-1: 2006 Category 3 PL d
•
EN ISO 13849-1:2008 Category 3 PL d
®
VLT Frequency Converters - Safe Torque Off Operating Instructions
MG37D102 - Rev. 2013-11-15
1 1
3