Installing Optional Board - Sony PFV-L10 Installation Manual

1-5. Installing Optional Board

1-5. Installing Optional Board
The optional board can be installed in any empty slot of
PFV-L10.
Installing Main Board (Front side)
1. Turn off the power switches A and B of PFV-L10.
2. Remove the front panel after loosening the two screws
on the panel.
Front panel
Screws
3. After removing the two screws, remove the board
retainer.
Board retainer
PSW 3x6
1-4 (E)
4. Insert the optional board along the board guide rails
with the board lever turned in the direction of the
arrow 1 , securely connect it to the MB-862 board by
pushing.
Main board
1
Side A
Board lever
5. Stick the slot label supplied with the optional board
onto the board lever.
6. Reinstall the board retainer.
7. Reinstall the front panel.
n
When removing the main board, turn the board lever in the
direction of the arrow 2 , and pull out the board to ward
you.
2
Board lever
MB-862 board
Board guide rails
PFV-L10