BYD S1 EV User Manual page 234

234 7-1 In case of a fault
■
Turn the
counterclockwise to loosen them.
Tip
●
Hold the end of the wrench handle down and do not allow the wrench to slide out
from the nut.
●
Do not remove the nuts, but just loosen them 1~2 turns.
Warning
●
Do not apply oil or lubricant on the bolts or nuts. Otherwise, the nuts will be loosened,
resulting in its falling off and even a serious accident.
Position the jack
4. Place the jack at the correct jacking
point as shown.
■
Confirm that the jack is placed on a
flat and stable surface.
Note
●
Confirm that the car is jacked properly, otherwise the car may be damaged.
wheel nuts