Outside - BYD S1 EV User Manual

： The airflow is mainly outputted
towards the feet of passengers.
：Airflow mainly blows to the front
windshield and side window.
Use essentials

To quickly cool the car parked in the sun, drive the car with the opened windows for a
few minutes. The hot air in the car can be drained and the cooling function of the air
conditioning can be speeded up.

Ensure that the inlet grille in front of the windshield is not blocked (such as, by leaves
or snow).

In humid weather, do not allow the cold air to blow onto the windshield. Because the
temperature difference between the inside and outside of the windshield can cause
fogging on the outside of the windshield.

Keep the underside of the front seats open so that the air in the car can be fully
circulated.

Under cold weathers, set the fan speed to high speed and run for 1 minute to remove
the snow and moisture from the air inlet passage, which can reduce the mist formation
on windows.

While driving behind other vehicles on heavily dusty roads or driving under windy and
dusty condition, close all windows. If the dusts raised by the vehicle still breach into the
vehicle after the windows are closed, it's recommended to select the internal
recirculation mode and set the fan speed to any position other than "0".
5-2 Air conditioning 179
5