BYD S1 EV User Manual page 109

■
Close the protective cover of the
charging port outlet
charging port cover on the electric
car.
■
Place AC charge connector in the
storage box of
compartment.
Tip
●
Grounding instructions: The device must be well grounded. If the charge device is
faulty or damaged, the grounding wire can provide the circuit discharge with
minimum impedance to reduce the risk of electric shock. The device is provided with
a grounding wire to connect the device grounding point and the grounding point of
the power supply plug. The plug must be matched with a properly-installed and
well-grounded electrical outlet.
●
If the car is not unlocked, do not open the outlet hatch in the car forcibly.
●
When the charging port cover is fully opened, do not close the front hatch.
●
Before pulling out the car plug, please unlock the car to unlock the electronic lock at
the car port, and pull out the car plug within 30s; otherwise the electronic lock at the
car port will be locked again.
●
Please contact BYD Auto Authorized Service Station or local electrician to select the
appropriate power supply according to the requirements of the charge device.
Warning
It is recommended to charge the power battery with electric car specific charge device
that meets relevant national standards:
■
Do not modify, disassemble or repair the charge device.
■
Do not use any additional wire or adapter/connector.
■
Do not touch the plug with your wet hand.
■
Do not use the charge device if the household plug cord is softened the car plug
cable is worn, and the insulation is broken or damaged.
■
Do not use the charge device if the protective package is broken or the electric car
outlet is disconnected, or there is any exposed damage.
and the
the luggage
4-1 Charge device 109
4