BYD S1 EV User Manual page 111

7. Press the locking button, unplug the vehicle connector, and reinsert it to the charging
case. If a seven-core to seven-core charge connector is used, it is recommended to
first unplug the car plug and then pull out the power plug from the charge post.
8. Close the hatch and protective cover of AC charge outlet;
9. Collect the charge device and place it in the appropriate place;
10. After the charge post AC charge is completed, close the protective cover and hatch of
the charging port.
Charge post DC charge
Connect the car to DC charge post with the charge connector of DC charge post for DC
charge.
Instant charge method:
Place the power switch in "OFF" position;
1.
2. Unlock the car and press the
charging cap opening switch to
open the charging port cover on the
front grille. Slide the charging port
cover upwards by a hand, and
open the hatch and protective
cover of DC charge outlet (see the
opening method of the hatch and
protective cover for household
single-phase AC charge outlet);
3. Connect the charger on the vehicle
end.
4. Start the charge in accordance with the charge device instructions;
5. The charge connection indicator on the dashboard will be turned on
6. During charge process, the relevant charge parameters and the charge image will be
displayed on the dashboard at the same time;
7. The charge will be ended by setting the charge post or when the power battery is fully
charged;
8. Press the charger locking button and unplug the charger.
9. Close the hatch and protective cover of DC charge outlet;
10. The charge post DC charge is ended.
4-1 Charge device 111
;
4