Nitto Kohki CB-01 Instruction Manual
  1. Manuals
  2. Brands
  3. Nitto Kohki Manuals
  4. Power Tool
  5. CB-01
  6. Instruction manual

Nitto Kohki CB-01 Instruction Manual

Circuit beveler pneumatic chamfering tool
Hide thumbs Also See for CB-01:
Table of Contents

Advertisement

Quick Links

Download this manual
Keep the manual handy – so you can use it whenever necessary.
CB-01(E).indd 1
PNEUMATIC CHAMFERING TOOL
Please read this manual carefully before you attempt to use
your tool so that you may use it properly and safely.
CIRCUIT BEVELER
PROFESSIONAL TOOL
Model
Maximum Operating Pressure
Air Consumption (No Load)
Rated Speed (No Load)
Chanferring Capacity
Chamfer Angle
Minimum workpiece thickness
Mass (Weight)
Sound Pressure Level
Sound Power Level
Vibration Level [Uncertainty K]
(according to ISO20643)
Thread Size of Air Inlet
※ Two indexable inserts for mildsteel come with the product.
Due to continuous product development/improvement the specifications and
configurations in this document are subject to change without prior notice.
Model CB-01
Specifications
MPa
3
m
/min
-1
min
Mild Steel
Stainless Steel
°
mm
kg
dB(A)
dB(A)
2
2
m/s
[m/s
]
Manufactured by :
NITTO KOHKI Co., Ltd.
2-9-4, Nakaikegami, Ohta-ku,
Tokyo, 146-8555, Japan
TEL
: (81)-3-3755-1111
FAX
: (81)-3-3753-8791
E-mail : overseas@nitto-kohki.co.jp
URL : www.nitto-kohki.co.jp
CB-01
0.6
0.15
28,000
0 ～ C1
0 ～ C0.5
45
1.5 (C0.5)
0.5
88
99
2.5
(1.8 [0.67])
Rc1/4
Orijinal Instructions
13.4.8 3:43:30 PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CB-01 and is the answer not in the manual?

Questions and answers

Related Manuals for Nitto Kohki CB-01

Summary of Contents for Nitto Kohki CB-01

  • Page 1 ※ Two indexable inserts for mildsteel come with the product. Due to continuous product development/improvement the specifications and configurations in this document are subject to change without prior notice. Manufactured by : NITTO KOHKI Co., Ltd. 2-9-4, Nakaikegami, Ohta-ku, Tokyo, 146-8555, Japan : (81)-3-3755-1111 : (81)-3-3753-8791 E-mail : overseas@nitto-kohki.co.jp...

  • Page 2: Table Of Contents

    : Bitte fragen Sie lhren Händler 7. ORDERING SERVICE PARTS ………………………… 8 nach eine Betriebsanleitung in 8. OPTIONAL PARTS ……………………………………… 8 Landessprache. 9. EXPLODED DIAGRAM : CB-01 ………………………… 9 ・French : S'il vous plait, veuillez demandez á votre foumisseur de manuel instruction en langue locale.

  • Page 3: General: Tools

    Turn off the start switch and disconnect the tool from Check to be sure that the use of this tool conforms power source. Do not leave the work area until the to all local noise regulations. tool comes to a complete stop. CB-01(E).indd 2 13.4.8 3:43:31 PM...

  • Page 4: General: Pneumatic Tools

    ● When a label/nameplate gets damaged, worn or becomes missing, contact the sales agent through which you have purchased your tool or Nitto Kohki Co. Ltd, directly for a replacement. DISPOSAL When a tool is taken permanently out of service, it is ●...

  • Page 5: Instructions For This Tool

    Hot chips/filings may fly out from the work piece. Always wear safety glasses, dust mask, earplugs, Package Contents check gloves (except knitted gloves) and long-sleeved CIRCUIT BEVELER CB-01 garment. SPANNER T-6F Keep your face well away from the work piece. HEX. SOCKET SCREW KEY 2 Use our original Indexable Inserts.

  • Page 6: Air Supply

    (2) Hold the tool, ① release the Lock Lever, and ② Tool grasp the Throttle Lever to start. 9.5mm (3/8in) I.D. Hose Lubrication (3) When the Throttle Lever is released, it will automatically turn off. Fig.2 CB-01(E).indd 5 13.4.8 3:43:32 PM...
  • Page 7 Large Small c. Install the new Indexable Insert (or the indexable Fig.6 insert rotated to a fresh edge) making sure it is in the correct direction and tighten them with the Indexable Insert Set Screw. CB-01(E).indd 6 13.4.8 3:43:32 PM...

  • Page 8: Cb-01(E).Indd

    (4) Place a new Guide Bearing on the Bearing Set actions. This can cause damage to the indexable Screw and tighten it by turning the 4 mm spanner insert or tool. clockwise. CB-01(E).indd 7 13.4.8 3:43:33 PM...

  • Page 9: Storage・Maintenance

    Plate not to turn and thus it may not be securely tightened. Blow the swarf off from the Guide Plate in the following cases. (Fig.14) - After finishing operation - When replacing the Indexable Insert - When adjusting the chamfering amount CB-01(E).indd 8 13.4.8 3:43:34 PM...

  • Page 10: Exploded Diagram : Cb-01

    10 EXPLODED DIAGRAM : CB-01 WARNING This diagram is for your reference only. Do not attempt to service or repair the Tool. Do not take the Tool apart. Contact an authorized Nitto dealer for all service and repair of the Tool. Improper service and repair can cause accidents and service injuries.
  • Page 11 CB-01(E).indd 10 13.4.8 3:43:34 PM...
  • Page 12 Lerchenstr.47 D-71144 Steinenbronn, Germany Tel: (49)-7-157-22436 Fax:(49)-7-157-22437 NITTO KOHKI CO., LTD., SHENZHEN REPRESENTATIVE OFFICE NITTO KOHKI CO., LTD., SINGAPORE BRANCH 2005C Shenzhen ICC Tower, Fuhuasanlu 168, Futian District, 10 UBI CRESCENT #01-62, Shenzhen, Guangdong, 518048 China UBI TECHPARK LOBBY D, SINGAPORE 408564,...

Table of Contents