Maintenance And Care; Disposal Information - Flex WS1505FR Operating Instructions Manual

Long-necked renovation sander WS 1505FR

Maintenance and care

Danger!
Before carrying out any work on the power
tool, always pull out the mains plug.
Cleaning
Regularly clean the power tool and ventilation
slots. Frequency of cleaning is dependent on
the material and duration of use.
Regularly blow out the housing interior and
motor with dry compressed air.
The machine extraction duct may eventually
become clogged, e.g. with damp dust. If this
occurs, clean the extraction duct.
Carbon brushes
The angle grinder features cut-off carbon
brushes.
When the wear limit of the cut-off carbon
brushes is reached, the angle grinder
switches off automatically.
Note!
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be
deemed null and void.
When the angle grinder is being used,
the carbon brushes can be seen sparking
through the rear air inlet apertures.
If the carbon brushes are sparking
excessively, switch off the power tool
immediately. Take your power tool to a
customer service centre authorised by the
manufacturer.
Gears
Note!
Do not loosen the screws on the gear head
during the warranty period. Non-compliance
will deem the guarantee obligations of the
manufacturer null and void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.

Disposal information

Danger!
Render redundant power tools unusable by
removing the power cord.
EU countries only
Do not throw electric power tools into
the household waste!
In accordance with the European Directive
2002/96/EG on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must be
collected separately and recycled in an
environmentally friendly manner.
Note!
Please ask your dealer about disposal
options!
15