Sony MVS-8000A-C Installation Manual page 13

Installation Procedure
1. Turn off the main power of this unit (MVS-8000A or
MVS-8000ASF) and disconnect the AC power cord
from the wall outlet.
2. Loosen the four screws (with drop-safe) and remove
the front panel to the arrow.
Screw (with
drop-safe)
Screw (with
drop-safe)
Front panel
(The illustration shows the MVS-8000A.)
3. Remove the fixing screws (MVS-8000A: 6 screws, MVS-
8000ASF: 4 screws) and remove the Extract PWB
stopper assembly.
B3 x 5
Extract PWB stopper
assembly
B3 x 5
(The illustration shows the MVS-8000A.)
MVS-8000A/8000ASF
4. While the eject levers are opened as shown in the
Screws
(with drop-safe)
illustration, insert the plug-in board into the board
guide rail.
Eject levers
(The illustration shows the MVS-8000A.)
1-5