Make Connections - THOMSON VMD 6 User Manual

Connector
To S
cover**
Audio/Video cable
Core filter
[mini-plug to RCA
plug] (provided)
S-Video cable
(optional)
To AUDIO,
VIDEO*
and -IN
connectors
"Y/C"/"CVBS"
video out
select switch
VCR
TV
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the
core filter (plug which has 3 rings around
the pin) to the camcorder.
VMD6 EN(40/80)

MAKE CONNECTIONS

Also refer to pg. 40 and 41.
1
To AV
To JLIP/
EDIT
Core filter
2
3
Editing cable
(provided)
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
If your VCR has the
To choose whether or not the following displays appear
SCART connector,
use the provided
on the connected TV . . .
cable adapter.
•Date/Time
To
Remote PAUSE
or R.A.EDIT
•Time Code
•Playback Sound Mode, Tape Speed And Tape Running
To PAUSE IN
Displays
DISPLAY
When connecting the cables, make sure to connect the
end with a core filter to the camcorder. The core filter
reduces interference.
Set the video out select switch of the cable adapter as
required:
Y/C
CVBS : When connecting to a TV or VCR which does not
When editing on a VCR equipped with a DV input
connector, a DV cable can be connected instead of an
S-Video cable and audio/video cable.
53
A THOMSON VCR equipped with a remote
pause connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A THOMSON VCR not equipped with a
remote pause connector but equipped with
an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to "VIDEO", then set the Power
Switch to " " while pressing down the Lock
Button located on the switch.
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
.... set "DATE/TIME" to "ON" or "OFF" in the Menu
Screen ( pg. 32).
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 32).
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
Menu Screen ( pg. 32). Or, press DISPLAY on the
remote control.
: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
accept Y/C signals and uses an audio/video cable.
CONTINUED ON NEXT PAGE
28/08/00, 16:07
53
EN