Make Connections - THOMSON HP 270 User Manual

To EDIT
To S-VIDEO
OUT
Editing
cable
(provided)
S-Video
cable
(optional)
To Remote
PAUSE or
R.A.EDIT
To PAUSE
IN
DISPLAY
* Connect when an S-Video cable is not used.
To AV OUT
Audio/Video
cable
(provided)
To AUDIO,
VIDEO*
and -IN
connectors
If your VCR has the
SCART connector,
use the optional
cable adapter.
VCR
TV

MAKE CONNECTIONS

Also refer to pg. 23 and 24.
1
A THOMSON VCR equipped with a Remote
PAUSE connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A THOMSON VCR not equipped with a
Remote PAUSE connector but equipped
with an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/MEMORY Switch to "VIDEO", then set the
Power Switch to "
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they
do, they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen ( pg. 43, 44).
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 43, 44).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen ( pg. 43, 44). Or, press DISPLAY on
the remote control.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
EN
" while pressing down the
CONTINUED ON NEXT PAGE
69