Basic Recording For Video And D.s.c - THOMSON VMD 6 User Manual

18
EN
Zoom in (T: Telephoto)
1 xW T
1 0 xW T
20xW
Zoom out (W: Wide angle)
Zoom display
1 0 xW T
Approximate zoom ratio
Power Zoom Lever
Power Switch
VMD6 EN(02/39)
RECORDING
FEATURE:
PURPOSE:
To produce the zoom in/out effect, or an instantaneous
T
40xW T
change in image magnification.
OPERATION:
Zoom In
Slide the Power Zoom Lever towards "T".
Zoom Out
Slide the Power Zoom Lever towards "W".
The further you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
Digital zoom
lock the focus by using the manual focus
zone
(
Zooming is possible to a maximum of 100X, or it
10X (optical)
can be switched to 10X magnification using the
zoom zone
optical zoom (
Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.
During Digital zoom, the quality of image may
suffer.
Digital zoom cannot be used w hen digital image
processing, such as Picture Wipe/Dissolve
(
activated.
Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to "W". Also see "TELE MACRO" in
the Menu Screen on page 24.
18

Basic Recording For Video And D.S.C.

Zooming
pg. 21), then zoom in or out in Record mode.
pg. 23).
pg. 26, 27) or Video Echo (
28/08/00, 15:47
pg. 28), is