Indications - THOMSON VMD 6 User Manual

68
EN
LCD Monitor/Viewfinder Indications During Video Recording Only
1 2
S O U N D 1 2B I T
:
TC 2 3 2 5
9 8
*Setting "ON SCREEN" to "SIMPLE" in the Menu
Screen removes indications marked with * from the
screen ( pg. 25, 32).
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
1 2
DSC
VMD6 EN(40/80)
3 * 4 *
SP 3 5
R E C
4 4 4
7 6 5 *
3 4 5 6
STD
1 0 / 5 0
68
INDEX
1
Displays the selected Fade/Wipe effect.
2
Appears when in the Squeeze or Cinema
mode.
3 * Displays the recording mode (SP or LP).
4 * Displays the tape remaining time.
5 * • "REC" appears during recording.
• "PAUSE" appears during Record-
Standby mode.
6
Appears when the wind cut mode is engaged
to cut down on noise created by wind.
7
Appears while the tape is running.
8
Displays the sound mode for approx.
5 seconds after turning on the camcorder.
9
Displays the Time Code.
1
Appears when the VIDEO/DSC Switch is set to
" " and the Power Switch is set to "
" ".
2
Appears and blinks during shooting.
3
Displays the Picture Quality mode of the stored
image. There are 2 modes available:
FINE and STD (Standard).
4
• Appears during shooting.
• Blinks when a MultiMediaCard is not loaded.
5
Displays the number of images that have already
been shot.
6
Displays the total number of shots that can
be stored, including those already taken.
28/08/00, 16:08

Indications

( pg. 26, 27)
( pg. 24)
( pg. 12)
( pg. 14)
( pg. 14)
( pg. 25)
( pg. 14)
( pg. 23)
( pg. 19, 25)
" or
( pg. 13, 17)
( pg. 17)
( pg. 12, 17)
( pg. 17)
( pg. 17)
( pg. 17)