Make Connections - THOMSON VMD 22 User Manual

Red to
AUDIO
R
To JLIP
(EDIT)
White to
AUDIO
L
Core filter
Editing
cable
(provided)
If your VCR has the
SCART connector,
use the provided
cable adapter.
To Remote
PAUSE or R.A.EDIT
To PAUSE IN
DISPLAY
* Connect when an S-Video cable is not used.
ATTENTION FOR EDITING CABLE
• Be careful not to mistake it for the JLIP
cable ( pg. 4).
• Make sure you connect the end with the
core filter to the camcorder.
VMD22 EN(66/100)

MAKE CONNECTIONS

Also refer to pg. 56 and 57.
1
To S
Yellow to
VIDEO*
2
Core filter
S-Video
cable
(optional) 3
Audio/Video
cable [RCA plug
NOTES:
to RCA plug]
Before Random Assemble Editing, make sure the
(optional)
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To AUDIO,
To choose whether or not the following displays appear
VIDEO* and
-IN
on the connected TV . . .
connectors
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
"Y/C"/"CVBS"
video out •Time Code
select switch
.... set "TIME CODE" to "ON" or "OFF" in the Menu
•Playback Sound Mode, Tape Speed And Tape Running
VCR
Displays
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
TV
For GR-DVX10 owners: Make sure to set "AV/S-VIDEO"
to "OUT" in the Menu Screen (
When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
Set the video out select switch of the cable adapter as
required:
Y/C
CVBS : When connecting to a TV or VCR which does not
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
You can use the AV OUT connector on the camcorder
for connection.
71
A THOMSON VCR equipped with a remote
pause connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A THOMSON VCR not equipped with a
remote pause connector but equipped with
an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
Insert a recorded tape into the camcorder and set the
POWER Switch to " " while pressing down the
Lock Button located on the switch.
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
Menu Screen ( pg. 41).
Screen ( pg. 41).
Menu Screen ( pg. 41). Or, press DISPLAY on the
remote control.
: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
accept Y/C signals and uses an audio/video cable.
CONTINUED ON NEXT PAGE
29/08/00, 15:46
71
EN
pg. 41).