C Filling The Rinse Aid Dispenser - Brandt VS1010X Instruction Manual

Always u se salt intended for dishwasher use.
The salt co ntain er is located beneath the lowe r basket and sh ould be filled as explained
in t he foll owing:
Warning!
Only use salt spe cif ically desi gne d for d ishwa shers u se! Every ot he r type o f
salt n ot speci fically d esig ned fo r dishwashe r use, e specially table salt, wil l
damage the w ater sof tene r. I n case of d amages caused by the use o f unsuitable
salt t he ma nuf act ure r doe s not g ive any wa rranty no r is liable for a ny damag es cau sed.
Only fil l wi th sa lt ju st before sta rting one of the co mp let e washing p rogra ms.
Th is wi ll pre ve nt any grains of sa lt or sa lty wa te r, wh ich ma y have been spilled,
remainin g on th e bo ttom o f th e machi ne fo r any p eriod of time , which may cau se
corrosi on.
A After the low er basket has been removed, unscrew and remove the cap from the salt container.
B Pl ace the end of the funnel (supplied) into the hole and
C Fill the salt cont ai ne r to its maximu m li mit
come out of the salt container.
D Af ter fil ling the container , screw back the cap tightly.
E The sal t warning ligh t will stop being after th e sa lt co ntain er has be en fi ll ed with sa lt .
F Imm ediat ely aft er f illing the salt into the salt container, a washing program should be started
program Other wise the filt er system, pump or ot her important parts of t he machine may be damaged ).
by salty water. This is out of warranty.
1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt w arning light in the con trol panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. I f salt has spilled, run a soak or qu ick prog ram to r emo ve it.
C. Filling the Rinse Aid Dispenser
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside, on the door and next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110m l.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, a s pot and streak free drying.
Warning!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any other substances
(e.g. Di shwasher cleaning agent, liquid detergent). Th is would damage the app liance.
poor i n
about 1.5kg of dishwasher salt .
with wat er,It i s normal fo r a sma ll amount of w at er t o
(We su ggest to use a short