Advertisement

Contents
Levelling by adjusting the feet .................................31
Anti-condensation protection ...................................31
Facing the door ......................................................32
Balancing the door .................................................32
Building in and fixing the dishwasher .......................32
Water connections ..................................................33
Draining away the waste water................................34
Electrical connection ...............................................34-35
Foam strip and soundproofing sea ...........................36
Installing the plastic corner brackets........................36
30
....................................31-36
...............................................36
.........................................36
EN
Pages

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VF400JU1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Brandt VF400JU1

  • Page 1 Contents Pages ........31-36 Installing your dishwasher Levelling by adjusting the feet .........31 Anti-condensation protection ........31 Facing the door ............32 Balancing the door ..........32 Building in and fixing the dishwasher .......32 Water connections ..........33 Draining away the waste water........34 Electrical connection ..........34-35 Foam strip and soundproofing sea ......36 Installing the plastic corner brackets......36 ..........36...
  • Page 2: Installing Your Dishwasher

    Installing your dishwasher Remove the 2 red protective wedges from the front of your appliance to avoid causing a leak. Levelling by adjusting the feet Ensure that your dishwasher is well balanced and stable. The four feet can be adjusted, so adjust them if necessary using a screwdriver.
  • Page 3: Facing The Door

    Installing your dishwasher This dishwasher must operate with a wood panel. Facing the door To fit a door to match your units onto the dishwasher’s door, use the installation template accessories supplied with your machine. Balancing the door (right and left) Adjust the tension on the springs, if required, to compensate for the...
  • Page 4: Water Connections

    Installing your dishwasher Water connections Important : check the water’s hardness: all the information you require is provided in the Chapter “Adjusting the water softener” in your When the tap is on the left- operating instructions hand side of the machine, use the manual.
  • Page 5: Draining Away The Waste Water

    Installing your dishwasher Draining away the waste water For machines installed in columns, Length of the drain hose: standard the height of the drain hose must 1.50m. If necessary, you can not be higher than the top of the increase the length of the drain machine.
  • Page 6 Installing your dishwasher Do not use an electrical extension, Replacing the power a double socket or an electrical cable timer. The installation must comply For your safety, this operation with the country’s prevailing norms. must be performed by the manufacturer’s After-Sales department or a person with similar training and experience...
  • Page 7: Foam Strip And Soundproofing Sea

    Installing your dishwasher Installation of the adjustable Foam strip and soundproofing plinth on built-in appliances seal. provide better noise insulation on built-in appliances, (depending on the model) install the soundproofing seals and the foam strip supplied with your machine (depending on the model). AVAILABLE FROM THE AFTER-SALES DEPARTMENT UNDER...

Table of Contents