Installation Preparation - Brandt VS1010X Instruction Manual

After Every Wash
After every wash, turn off the water supply to the
appliance and leave the door slightly op en so that
m oisture and odours are not tra pped inside.
Remove the Plug
Before cleaning or performing maintenance, always
remove the plug from the socket.
No Solvents or Abrasive Cleaning
To cle an the e xterior a nd rubber p arts of the dishw asher,
do not use solvents or abrasive cle aning products.
O nly use a clo th w ith warm so apy water.
To rem ove spots o r stains from the surface of the
interior, use a cloth da mpened with water a n a little
vinegar, o r a cleaning pro duct mad e specifically for
dishw ashers.
Th e installation of the pipes
and electrical equipments
should be done by professionals .

Installation preparation

●
The installation position of dishwasher sho uld be ne ar the existing in let and drain hoses and power co rd.
O ne side of the ca binet sink should be chosen to facilitate the connection of drain hoses of the dis hwa sher.
N ote: please check the accompanying installation acce ssories( hook for aesthetic panel,screw)
Electrical Shock HazardDisconnect
electrical power beforeinstalling dishwasher.
Failure to do so can result in death or
electrical shock.
When not in Use for a L ongTime
It is recommend that you run a was h cy cle with the
dishwasher empty an d the n remove the plug from the
sock et, turn off the wa ter supp ly and leave the door of
the appliance slightly open. This w ill help the d oor
seals to last longer and prevent odours from forming
within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
Seals
One of the factors that cau se odours to form in the
dishwasher is rema inin g food s trapped i
Periodic cleaning with a damp sponge will prevent this
from occurring.
n the seals.