Table of Contents
Advertisement
Steering
With the build in steering you can manage all drive, brake and swerve situations with your
electronic wheelchair. The electrical installation and electronics of your wheelchair are con-
stantly checked.
In case of demerit, the electronics automatically switch off the power.
In this case you should contact your dealer.
Activate the on/off switch. Slowly move the joystick forward. The more you move the joystick
forward, the faster you can drive.
If you want to drive to the left or right, move the joystick in the desired direction. To drive
backwards, pull the joystick out of the centre to the back.
If you have to slow down whilst driving, put the joystick in the centre. The slower this is done,
the more progressive you will slow down.
If you just release the joystick, the wheelchair will stop as soon as possible.
Your wheelchair is secured from unintentional bumping by a blocking system. There is no
power when the joystick is in the centre and the wheelchair is powered on. After starting your
electronic wheelchair, the joystick must stay at least 2 seconds in deadlock. After this, the
wheelchair is ready to go.
Adjustment of the control unit
The position of the control unit can be adjusted seperatly from the position of the armrest.
To adjust the control unit horizontally, loosen screw (1).
To adjust the control unit vertically,
use handle (2).
1 1
2 2
- 10 -
Advertisement
Table of Contents
