Table of Contents
Advertisement
5. ISR
5.
ISR
5-1.
Overview
The BKSI-2010 corresponds to an ISR (Interactive Status Reporting) function.
Using this function, the status of the BKSI-2010 or the contents of a generated error can be intensively
monitored and managed on the monitor screen of a personal computer. The data displayed on the monitor
screen can be stored or printed as a file.
The major functions of the BKSI-2010 are as follows.
Monitor functions
n
• If a message is displayed, check whether the normal signals are input.
• "*" in the message means a numerical character (* = 1,2, or 3 • • •).
• Error message
[SCSI Block error]
Message
SCSI BUS STOP
• Warning message
[Recording Block warning]
Message
REC MAIN MEMORY FULL
SDDI CRC ERROR RX
[SCSI Block warning]
Message
ILLEGAL PHYSICAL FORMAT
SCSI BUS PARITY ERROR
SCSI DATA ERROR
SCSI DEVICE* HARDWARE ERROR
SCSI DEVICE* NOT RESPOND
SCSI IOP OVERFLOW
SCSI QUEUE FULL
UNKNOWN SCSI DEVICE
[Communications Block warning]
Message
ISR COMMUNICATION ERROR
REMOTE A COMMUNICATION ERROR
REMOTE B COMMUNICATION ERROR
VSBUS COMMUNICATION ERROR
1-18(E)
Description
SCSI bus is stopped.
Description
A recording block memory is full
CRC error is detected in the SDDI input signal
Description
Physical format of the disk is illegal
A parity error on SCSI bus is detected
A data error is occurred on the SCSI.
A hardware trouble is detected in No.* of SCSI device
There is no response from No.* of SCSI device
An area for SCSI I/O process is overflowed
A command queue of SCSI device is overflowed
Unsupported SCSI device is connected
Description
ISR communication error is detected
A communication error in REMOTE A port is detected
A communication error in REMOTE B port is detected
VS-BUS communication error is detected
BKSI-2010
Advertisement
Table of Contents
