Table of Contents
Advertisement
2. Information of BKSI-2010
Multi File Mode
Items to be set up
. Number of Arrays
. Number of Audio Channels
. Start Time Code
Setup Procedure
1. Set the switch lever of the mode select switch (S3301) on the SCS-4 board as shown below.
(
indicates the switch lever position.)
ON
1
2
3
2. Turn on the power of SIU-80.
3. Enter "setup" and hit the Enter key.
Sample display) . . . . . When using 2 arrays and Audio 4 channels
SDC> setup "
SDC Setup
1. Set Defaults to NOVRAM
2. Software Reset
[Multi File Format Mode]
(1) How many arrays to be connected ?
2. 1 or 2 arrays
3. 3 arrays
4. 4 arrays
5. 5 arrays
6. 6 arrays
7. 7 arrays
Enter number(default is 2) ? "
(2) How many audio channels ?
Enter number(default is 2) ? [2 or 4] 4"
(3) What is initial value of Start Time Code ?
Enter STC [hhmmssff](default is 00000040) "
2 arrays (1080files/array)
Audio 4ch
ok ? [Y/N]
1-12(E)
4
5
6
7
8
Or enter "2" and hit the Enter key
BKSI-2010
Advertisement
Table of Contents
