Table of Contents
Advertisement
4. Enter "y".
The setting is written in NOVRAM and the SCS-4 board is reset automatically.
SDC-OS Version
x.xx(xxx xx, xxxx)
(C)Copyright Sony Corporation 1996, 1997
File System Version 1.00(May 25,1995)
(C)Copyright Sony Corporation 1996
SDC-Software Version
(C)Copyright Sony Corporation 1996
HELP CMD : ? MAN VER README
SETUP CMD : SETUP
DIAG CMD : ADIAG MDIAG EDIC
FILE CMD : LS DEL
LOG
CMD : CMDLOG SYSLOG
SDC>
5. Turn off the power of the SIU-80.
6. Set S3301-1 to OFF.
7. Remove the communication cable from CN1101.
If any BKSI-2010 boards are installed in the SIU-80;
8. Interchange the communication cable to CN1101 on another BKSI-2010.
9. Perform steps 1 through 7.
10. After the setup to every BKSI-2010 is completed, turn on the power of the SIU-80.
BKSI-2010
x.xx(xxx xx, xxxx)
2. Information of BKSI-2010
1-15(E)
Advertisement
Table of Contents
