Specifications; Attachments/Accessories - Toro 30672 Operator's Manual

Gear-Shift Lever
The transmission has 5 forward speeds, neutral,
reverse, and an in-line shift pattern.
Important:
Do not shift gears while the machine
is moving, as transmission damage may occur.
Upper Control Bar
Shift to the desired gear and push forward on the
upper control bar and blade-control bail to move
forward and pull back to brake. Pull back the right
side of the upper control bar to turn right and pull back
the left side to turn left.
Lower Control Bar
Shift the transmission to reverse and squeeze the
lower control bar and handle together to move
backward.
Parking-Brake Lever
Pull back the upper control bar and swing the brake
lever up against the upper handle to engage the
parking brake (Figure 4).
Key Switch
This switch is used in conjunction with recoil starter
and has 2 positions: R
Recoil-Start Handle
Pull the recoil-start handle to start the engine (not
shown in Figure 3).
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine.
Choke
Use the choke to start a cold engine.
and O .
UN FF

Specifications

Note:
Specifications and design are subject to
change without notice.
32-inch Mowers
Width with deflector down
Length
Height
Weight
36-inch Mowers
Width with deflector down
Length
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
12
116 cm (46 inches)
183 cm (72 inches)
104 cm (41 inches)
181 kg (400 lb)
118 cm (47 inches)
188 cm (74 inches)
104 cm (41 inches)
209 kg (460 lb)