Disc Playback - Teac CR-H238I Owner's Manual

1 Press the SOURCE button repeatedly to select
"CD".
"No disc" will be displayed if no disc has been inserted.
2 Press the Open/Close button (L).
3 Place a disc on a tray with the printed surface
facing up.
< The disc must be loaded centrally into the disc tray. If
the disc is not correctly loaded, it may not be possible
to open the tray again once it has closed.
< Never place more than one disc on the tray.
< Do not stick labels or tapes on the disc.
< Do not use irregularly-shaped discs.
22

Disc Playback

3 1 5 2 4
4 Press the Open/Close button (L) to close the tray.
When an audio CD is loaded:
The total number of the tracks and total play time of
the disc is displayed.
CD/Stop
T023 65:10
When an MP3 or WMA disc is loaded:
The total number of folders and files of the disc is
displayed.
CD/Stop
F031 T999
5 Press the Play/Pause button (G/J).
Playback starts from the first track/file.
When an audio CD is played back:
CD/Play
T001
current track number
When an MP3 or WMA disc is played back:
CD/Play
T001
current file number
0:13
elapsed time of the current
track
0:13 MP3
elapsed time of the current
file