Chapter 5. Connecting The Usb Portacd-Rw To And Installing Software; On Macintosh Systems; Connecting To A Macintosh System; Figure 59. Connecting Cables - Teac E24E User Manual

Chapter 5. Connecting the USB PortaCD-RW to and
Installing Software on Macintosh Systems
You can connect the USB version of the TEAC PortaCD-RW to an Apple Power
Macintosh iBook, iMac, PowerBook, or G3 or G4 computer that features a USB
port.
Note: You cannot interface the PCMCIA version of this drive to a Macintosh
system. The Macintosh does not support the PCMCIA interface.

Connecting to a Macintosh System

Follow these steps:
1. Connect the appropriate end of the USB cable to the USB interface con-
nector on the side panel of the PortaCD-RW (Figure 59).
2. Insert the USB cable into a USB port on your Macintosh computer.
Note: Connect the cable directly to the USB connector on your Macintosh
or self-powered USB hub. Do not connect the cable to the USB connector on
the keyboard. See your Macintosh documentation for more information.
3. Connect the AC adapter cable to the AC power input on the PortaCD-
RW drive (Figure 59).
TEAC PortaCD-RW User's Manual
headphones cable
(not included)

Figure 59. Connecting Cables

Connection Sequence
1. power cable --> drive
2. USB cable --> drive
3. USB cable--> computer
4. power cable-->AC outlet
USB cable
AC adapter cable
49