Installing The Driver Without A Floppy Drive; Figure 19. Device Manager - Teac E24E User Manual

8. Click the
Finish
The system displays an icon in the
.
Manager
You can access the
Start>Settings>Control Panel>System>Hardware>Device Manager
Figure 19).
The system now recognizes the drive as a CD-ROM drive.
9. Before you can record to CD-R and CD-RW discs, you must first install
the Easy CD Creator Pre-Mastering software.
For software installation instructions, see "Chapter 4. Installing and Using
Easy CD Creator 5 Basic on Windows Systems" on page 33.

Installing the Driver Without a Floppy Drive

If you do not have a floppy disk drive installed on your IBM PC compatible
system, but you have access to the Internet via the same system, you can download
the drivers from the TEAC website and save them on your hard disk. You can then
install the drivers from the hard disk.
Download the appropriate drivers and installation instructions from the TEAC
website at:
http://www.teac.com/dspd
TEAC PortaCD-RW Drive User's Manual
button to complete the installation.
Device Manager

Figure 19. Device Manager

Installing the Driver Without a Floppy Drive
folder and in the
My Computer
by using the following menu sequence:
Device
(see
19