Drive Letter Allocation
Windows 98SE/Me automatically assigns a drive letter to the new drive during the
installation. In some cases, it may be convenient to re-assign drive letters. To do
so, follow these steps:
1. Select
Start>Settings>Control Panel>System>Device Manager
2. Click on the CD-ROM category.
See Figure 11 on page 14.
3. Select the TEAC drive item, click the
tab on the
Settings
See Figure 12.
4. Under
Reserved drive letter
and
drive letter
5. Click the
OK
TEAC PortaCD-RW Drive User's Manual
panel.
Properties
, specify the desired drive letter for both
.
End drive letter
button to confirm your selection and restart your system.
Figure 12. Drive Letter Allocation
button, then click the
Properties
Drive Letter Allocation
tab.
Start
15