3. Select the
Recommended
The system displays an
to specify the location of the driver software (Figure 8).
Figure 8. Add New Hardware Wizard: Specify Search Location
4. Insert the provided floppy diskette, which contains the USB driver soft-
ware, into the computer's floppy disk drive.
5. Select the
Floppy disk drive
Windows locates the FREECOM CABLE USB and is now ready to install the
drivers on your system (Figure 9).
6. Click the
Next
The system completes the installation of the driver software and displays the
following panel.
TEAC PortaCD-RW Drive User's Manual
Installing the Driver Software on Windows 98SE/Me Systems
option, then click the
Add New Hardware Wizard
option, then click the
Figure 9. Add New Hardware Wizard: Device Search
button.
button.
Next
panel that asks if you want
button.
Next
13