Front And Right Panels; Figure 3. Front And Right Panels - Teac E24E User Manual

Front and Right Panels

Eject button: Pressing the Eject button releases the disc tray from the drive.
Gently pull the disc tray to open it, or push to close. Some software can
control disc ejection.
Caution: Do not pull open or close the disc tray forcefully by hand or you may
damage the unit. Press the eject button to eject; push the tray gently to close it.
On/Busy indicator: This LED indicator lights up during seek/data transfer
and flashes to indicate that the drive is in write mode or playing audio.
Emergency eject mechanism: To eject a disc when the standard means fail,
insert a slender, straight tool (such as a straightened paper clip) into the
emergency eject hole. Press firmly to partially extend the disc tray.
Power supply selection switch: Use this switch to set the power source for
the PortaCD-RW drive. Refer to "Power Sources/Battery" on page 5.
Line out audio/ headphone jack: You can connect headphones or external
speakers to this 3.5 mm stereo mini-jack.
AC Power input: Connect the AC adapter to this input.
Interface connector: The PortaCD-RW comes in either PCMCIA or USB
interface versions. Connect the appropriate end of the provided PCMCIA or
USB interface cable to this connector.
TEAC PortaCD-RW User's Manual

Figure 3. Front and Right Panels

Front and Right Panels
7