Setting The Equalizer; Checking The File Information - Sanyo ICR-FP600D Instruction Manual

All manuals and user guides at all-guides.com
Setting the equalizer
Adjust the volume of high tone/ intermediate tone/ low tone to a preferred level
according to the type of music.
1 Turn on the unit and press and hold down the [
two seconds or more in the stop state.
2
When " " is displayed, press the [
the desired category of music and press the [
:The equalizer is not used.
:The low tone range is emphasised.
:The low tone range and the high tone range are emphasised slightly.
:The low tone range and the high tone range are emphasised.
:The intermediate tone range is emphasised.
If the " " folder or the "
Note
displayed. In this case, press the [
button and then conduct the operation above.
Setting is now complete.
3
Play a file. (See Page 22)
This setting remains even if the power is turned off.
Note
Checking the file information
Press the [ ] button in the stop state to check the file information such as
date, current time, recording date and time, and remaining recordable time. The
information displayed depends on the selected folder.
GB-37
] or[ ] button to select
(play)] button.
" folder has been selected, "
(fast-reverse)] or [
] button for
" is
(fast-forward)]