Notes On Handling The Sd Card - Sanyo ICR-FP600D Instruction Manual

All manuals and user guides at all-guides.com
Notes on handling the SD card
- Do not directly touch the terminals, allow them to make contact with metal
or hard objects, or short-circuit them. Data may be damaged or lost by static
electricity or the like.
- Insert the SD card with the correct orientation all the way into the unit. If it is
inserted with an incorrect orientation or is insufficiently inserted, the unit will
not operate properly.
- Do not release your fingers from the card before the card is completely
inserted or removed.
- Keep out of the reach of children. Young children may put the card in their
mouth and choke or cause some other unexpected injury or accident.
- The cards are precision devices. Do not bend, drop, or subject them to strong
forces or shocks.
- Avoid using or storing the cards in places with extremely high or low
temperatures, subject to direct sunlight, in a completely closed vehicle, near
air conditioners or heaters, or in humid or dusty locations.
- Avoid using or storing the cards in locations where strong static electrical
charges or electrical noise can be easily generated.
- When using an SD card in this unit, be sure to format it in this unit (initialization).
(See ALL ERASE in "Erasing" on page 27.)
An SD card that was formatted in another IC recorder or a PC may not be used
with this unit.
- SD cards that can be used in this unit are SD cards with a capacity of 512 MB
to 2 GB and SDHC cards with a capacity of 4GB and 8 GB (as of December
2008). Some SD cards do not function correctly in this unit depending on
the manufacturer and the type. For cards for which Sanyo has confirmed
operation, see page 53.
- If the SD card is locked, recording
files, erasing files, or division of files
cannot be carried out.
- Note that the SD card may be
locked when it is inserted into this
unit.
Locked Unlocked
GB-16