Recording At Designated Time; (Timer) - Sanyo ICR-FP600D Instruction Manual

All manuals and user guides at all-guides.com
Recording at Designated Time (Timer)
Recording can be started automatically at a designated time.
Before setting, check that the remaining quantity of battery power is sufficient.
1 In the stop state, press the [
button.
2
Press the [ (fast-reverse)] or [
forward)] button to select "
the [ (play)] button.
3
Press the [ ] or [
the recording time and press the [
(fast-forward)] button.
: 30 minutes
: 1 hour
: 2 hours
: Until all available space is used.
: Cancels timer setting.
4 P r e s s t h e [
designate the hour of recording start
time and press the [
button.
5
Press the [ ] or [
recording start time and press the [
When " " is displayed at the lower right of the screen, setting is complete.
One minute before the designated time, the power turns on automatically and
the unit enters the standby mode for timer recording.
When recording starts and the preset time elapses, recording stops automatically.
Note - If the designated time approaches during playback, playback stops automatically
one minute before the designated time and this unit enters the standby mode for
timer recording.
- To stop recording during the timer recording session, press the [
- Even if the power is off, this unit turns on at the timer start time and operation
commences. At the timer end time, the unit turns off.
GB-29
]
(fast-
" and press
] button to select
] o r [ ] b u t t o n t o
(fast-forward)]
] button to designate the minute of
(play)] button.
] button.