All manuals and user guides at all-guides.com
Preventing mishandling (Hold function)
When this unit is placed in a pocket and used, this function can prevent
unintentional battery consumption and operation of the device due to
inadvertent pushing of buttons.
Set the Power/Hold switch to
recording. The following screen is displayed and button operation is disabled.
If the Power/Hold switch is set to
screen is displayed and button operation is enabled.
Note
- For the Scene select (microphone sensitivity) switch and the Microphone/Line input
switch, the hold function does not operate even if it is set.
- When recording or playback is complete and the hold function is on, the power
turns off automatically.
(OFF) in the figure below during playback or
(ON) in the figure below, the following
GB-14