Installation Instructions; Flow Diagram; Technical Data - Hans Grohe Talis E 80 71706000 Instructions For Use/Assembly Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.

Technical Data

This mixer series-produced with EcoSmart
limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
The product is exclusively designed for drinking water!
4
English
Symbol description
(flow
®
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
Assembly see page 32
Do not use silicone containing acetic acid!
Dimensions (see page 31)

Flow diagram

(see page 31)
with EcoSmart
®
without EcoSmart
®
Spare parts (see page 35)
Special accessories (order as an
extra)
seal #98996000
(see page 32)
Operation (see page 36)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Cleaning (see page 34)
Test certificate (see page 36)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Metris 100 3116600013132000

Table of Contents