Electrolux EB6L5XDCN User Manual page 9

Oven func‐ Application
tion
This function is de‐
signed to save energy
during cooking. For
Moist Fan
more information refer
Baking
to "Hints and tips" chap‐
ter, Moist Fan Baking.
The oven door should
be closed during cook‐
ing so that the function
is not interrupted and to
ensure that the oven
operates with the high‐
est energy efficiency
possible. When you use
this function, the tem‐
perature in the cavity
may differ from the set
temperature. Due to the
use of the residual heat
- the heating power may
be reduced. For general
energy saving recom‐
mendations refer to:
"Energy Efficiency"
chapter, Energy Sav‐
ing.This function was
used to comply with the
energy efficiency class
according to EN
60350-1.
To bake cakes with
crispy bottom and to
preserve food.
Bottom Heat
To add humidity during
the cooking. To get the
right colour and crispy
BakingPlus
crust during baking. To
give more juiciness dur‐
ing reheating.
To grill flat food in large
quantities and to toast
bread.
Fast Grilling
Oven func‐ Application
tion
To roast larger meat
joints or poultry with
bones on one shelf po‐
Turbo Grilling
sition. Also to make gra‐
tins and to brown.
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.
5.4 Setting the
function:BakingPlus
This function allows to improve humidity
during the cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Do not open the oven door when the
function operates.
• Open the oven door with care after
the function stops.
Refer to "Hints and tips"
chapter.
1. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
2. Put food in the oven and close the
oven door.
3. Set the function:
4. Turn the control knob to select a
temperature.
5. To turn off the oven, turn the knobs
to the off position.
6. Remove water from the cavity
embossment.
ENGLISH 9
.