Table of Contents
Advertisement
Detaching the rails
Notes
All manuals and user guides at all-guides.com
3. Slide out the panel (Fig. B).
Clean the glass panel with glass cleaner and a soft
cloth.
4. Push the panel back in. Ensure that the smooth
surface is facing outwards.
5. Replace the cover and screw it back on.
6. Refit the oven door.
The oven must not be used again until the panels
have been correctly installed.
The rails can be removed for cleaning.
To unhook the rails:
1. Lift the front of the rails upwards
2. and detach
3. Then pull the rails forward
and take them out.
Clean the rails using either washing up liquid and a
sponge or a brush.
To hook rails back into position:
First insert the rails into the rear socket,
push them back slightly
and then hook them into the front socket.
The rails fit both the left and right sides. Recess (a)
must always be at the bottom.
Enamel in the oven is baked on at very high
temperatures. This can cause some slight colour
variation. This is normal and does not affect the
function. Do not use coarse scouring pads or strong
cleaning agents to remove such discolourations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
Anti corrosion protection is guaranteed.
21
Advertisement
Table of Contents
