Removing The Touchpad; Installing The Touchpad - Dell Precision M3800 Owner's Manual

Removing the Touchpad

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a) base cover
b) battery
3. Lift up the latch [1] and disconnect [2] the touchpad cable from the system board. Remove the screws that secure the touchpad to
the computer.
4. Slide out the touchpad and lift it away from the computer.

Installing the Touchpad

1. Align the touchpad in its position on the computer.
2. Tighten the screws to secure the touchpad to the computer.
3. Connect the touchpad cable to the system board.
4. Install the:
a) battery
b) base cover
5. Follow the procedures in After Working Inside Your Computer.
12 Demontáž a instalace součástí