Installing The Msata Card; Removing The Fans - Dell Precision M3800 Owner's Manual

Installing the mSATA Card

1. Align the notch on the mSATA card with the tab on the mSATA-card connector.
2. Insert the mSATA card into the mSATA-card connector.
3. Tighten the screw to secure the mSATA card to the computer.
4. Connect the I/O-board cable to the system board and I/O board.
5. Install the:
a) battery
b) base cover
6. Follow the procedures in After Working Inside Your Computer.

Removing the Fans

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a) base cover
b) battery
3. Perform the following steps to remove the system fan:
a) Disconnect the system fan cable from the system board [1].
b) Disconnect the camera cable from the I/O board [2].
c) Remove the screw that secures the system fan to the computer.
d) Lift the system fan away from the computer [3].
4. Perform the following steps to remove the video-card fan:
a) Disconnect the video-card fan cable from the system board [4].
b) Remove the screw that secures the video-card fan to the computer.
c) Lift the video-card fan away from the computer [5].
Demontáž a instalace součástí 17