Menu Operations; Menu Configuration - Tascam RC-601mkII Owner's Manual

MENU OPERATIONS

Various settings on the CD-601MKII can be made using
the menu. Menu operations can be performed on either of
the CD-601MKII and RC-601MKII. Although their settings
and indications are exactly the same, the keys used for
operation differ slightly.

Menu Configuration

The menu contains the following items. The items and details of each item are exactly the same as those in the menus on the
CD-601MKII.
Menu
Item Display Details Display
No.
01 A_CUE Auto cue level
02 ONLINE Online play output
03 MONI Monitor output
04 CLOCK Clock source
05 PROG Program setting
06 INCR_P Incremental play
07 TIMER Timer play
08 OUTPUT Output stereo mono
09 OUT_L Output level
10 F_SAFE Fail safe
11 EOM End of message time
12(*) E_CHK End check time
13(*) BANK Memory BANK select
14(**) F_STAR Fader start polarity
15(**) F_STOP Fader stop state
16 CUE_UP Auto CUE up state
17(*) RMT Remote control
18 FRAME Frame display
19 TIME Time display
20 CUESET Cue point set
21 A_CLR Memory ALL clear
22 USER User setting
23(**) RS232C Com PORT baud rate
(none) xxxxH M o t o r a d d i t i o n t i m e
display
* Menu items followed by (*) in the above table are valid when the Remote Control Unit RC-601MKII is connected.
* Menu items followed by (**) in the above table are external control-related items. For details on these items, refer to the
CD-601MKII Owner's Manual.
A l l o p e r a t i o n s i n c l u d i n g m e n u o p e r a t i o n s o n t h e
CD-601MKII are not possible while menu operations are
being executed on the RC-601MKII. Likewise, all operations
including menu operations on the RC-601MKII are not
possible while menu operations are being executed on the
CD-601MKII.
Description
Auto cue level setting
Setting the terminals for online
output
Setting the terminals for monitor
output
Operation clock setting
Program setting
Incremental play ON/OFF
Timer play ON/OFF
Output stereo/monaural setting
Output level setting
Failsafe function ON/OFF during
online playback/READY
End of track warning display setting
End check time setting
Memory back selection
Setting fader start polarity
Setting the state of the CD player
at a fader stop
Setting the CD player standby
mode during an auto cue or an
auto ready
CD player operation enable/disable
setting when remote control (*)
RC-601MKII is used
Setting the frame display of the
time display area of the display
window
Setting the time display switching
pattern
Cue point setting
Memory all clear
Calling up user banks to save
settings to
RS-232C baud rate setting
Motor total drive time display
Reference Item
"Setting the Auto Cue Level"
"Setting the Terminals for Online Output" (p. 24)
"Setting the Terminals for Monitor Output" (p. 24)
"Referencing to an External Clock Source" (p. 25)
"Program Playback"
"Incremental Play Function"
"Timer Play Function"
"Setting Stereo/Monaural"
"Setting the Output Level"
"Failsafe Function"
"Displaying the End of Track Warning"
"Checking the Ending of Tracks"
"Saving Disc Information"
CD-601MKII Owner's Manual
CD-601MKII Owner's Manual
"Auto Ready Function"
"Preparations"
"Clearing the Frame Display"
"Switching the Time Display"
"Auto-registering Cue Points"
"Clearing Menu Settings"
"Saving Menu Settings"
CD-601MKII Owner's Manual
"Viewing the Total Motor Time"
TASCAM RC-601MKII
(p. 17)
(p. 16)
(p. 18)
(p. 27)
(p. 24)
(p. 24)
(p. 25)
(p. 26)
(p. 26)
(p. 23)
(p. 17)
(p. 8)
(p. 27)
(p. 26)
(p. 9)
(p. 15)
(p. 15)
(p. 27)
13