Table of Contents
Advertisement
PLAYBACK-RELATED FUNCTIONS
Auto Cue Function
When the auto cue function is turned ON, the remote control
unit automatically stands by (in the online READY or monitor
PAUSE mode) at the audio start point of the track when the
track is selected or when the auto ready function is ON.
(→ page 11 "Selecting the Track")
Press the AUTO CUE key to turn the auto cue function ON/
OFF. When the auto cue function is ON, "A.CUE" is lit in the
display window.
The auto cue function ON/OFF setting is backed up
on the remote control unit. So, the same setting is
reproduced when the remote control unit is next turned
ON.
After searching for the audio start point on the track with
the auto cue function ON, whether the remote control unit
enters the online READY mode or the monitor PAUSE mode
is determined according to the auto cue up setting described
below.
Setting the Auto Cue Level
Select from the following auto cue levels using menu No. 01
("A_CUE"). The point where signals at the auto cue level or
above first appear on the selected track are recognized as
the audio start point.
Selection:-72 dB (default setting), -66 dB, -60 dB,
-54 dB, -48 dB
Setting Auto Cue Up
Select whether the remote control unit enters the online
READY mode or the monitor PAUSE mode when the auto
cue function is activated using menu No. 16 ("CUE_UP").
Selection: RDY (online READY, default setting),
PUS (monitor PAUSE)
[NOTE]
•
The remote control unit also enters the online READY
or monitor PAUSE mode according to the auto cue up
setting when the auto ready function is activated.
Auto Ready Function
When the auto ready function is ON, the remote control unit
stands by at the start of the next track after a track is played
back.
Press the AUTO READY key to turn the auto ready function
ON/OFF. When the auto ready function is ON, "A.READY"
is lit in the display window.
The auto ready function ON/OFF setting is backed up on
the CD player. So, the same setting is reproduced when
the CD player is next turned ON.
When the auto ready function is activated, the remote
control unit enters the online READY or monitor PAUSE
mode according to the setting of menu No. 16 ("CUE_UP").
(→ above "Setting Auto Cue Up")
Also, the remote control unit stands by at the following
points according to the playback mode:
Regular playback:
Start of next track
Single playback:
Start of current track
Program playback:
Start of next programmed track
[NOTE]
•
When the auto ready function and auto cue function are
used together, the remote control unit stands by at the
audio start point of the next track after a track is played.
Pitch Control Function
The pitch control function can be used to control the
playback speed within the ±12.5% range.
Press the PITCH CONTROL key to turn the pitch control
function ON/OFF. When the pitch control function is ON,
"PITCH" and the current pitch control value light in the
display window.
When the pitch control function is ON, the +/- keys can be
used to set the pitch control values in 0.1% increments.
Pressing both the + and - keys simultaneously resets the
pitch control value to 0.0%.
The pitch control function ON/OFF setting and pitch
control value are backed up on the remote control unit.
So, the same settings are reproduced when the remote
control unit is next turned ON.
[NOTE]
•
Even when the pitch control function is activated, a digital
signal of sampling frequency 44.1 kHz is output at all
times from the digital output terminal on the remote control
unit. Note, however, that when the remote control unit is
synchronized to a 48 kHz external word clock signal, a
digital signal of sampling frequency 48 kHz is output.
17
TASCAM RC-601MKII
Advertisement
Table of Contents
